If you have booted the Emax 2 from Hard disk, then you can just insert an Emax 1 disk and load the bank and it will work. (i've done this)
If you are booting off floppy, then you have to have a valid Emax 2 OS on the disk....so that would give you software errors as it needs to load OS modules from disk....
If you save the Emax I bank onto PC with EMXP, and have an Emax 2 formatted floppy, then you could write the Emax 1 bank to the Emax 2 OS floppy and it should work.
-T
On Wed, Dec 31, 2014 at 12:59 PM, julioho_53077@... [emax] <emax@yahoogroups.com> wrote:
Hi,
I just bought an Emax II without any disks and I was wondering if I could convert some of my Emax I disks to Emax II. I would guess this not to be a difficult task, yet I couldn't find the command on the Omniflop program and when trying to check the OS on the Emax I disks it said it didn't have a valid OS on them... By the way, tried playing the disks afterwards on the Emax I and it gave me a disk error message.
Thanks for any help you can provide.