Message
Re: EMXP - Saving as S1000 format files and using those files - can't load them?
2014-12-06 by esynthesist@...
If the disk manager of EMXP recognizes the USB stick in the USB port, it's able to create an EIII filesystem on it, as follows:
- In EMXP v3.0.2, go to menu option 4.4
- If the USB drive appears in the drive overview screen, select the drive and press enter
- Then select 4 (logical format...), and press enter when EMXP asks if the disk is ready to be formatted.
You'll have to select one of the pre-defined file system sizes, e.g. 962MB for a 1GB drive. It doesn't matter what the capacity of the USB drive is, as long as it can hold the size of the filesystem it will work fine (e.g. an 8GB USB flash drive holding a 962MB EIII file system).
- once the drive has been logically formatted, you will be able to store EIII banks (.EB3 files) on it.