Keyboards require longer to go through the pass through connector. think I got .600" length… it's been awhile.
standard length is 1/4" which isn't long enough in either case….
-T
On Sep 24, 2014, at 5:25 PM, Scott Stanley scartattack@gmail.com [emax] wrote:
Thanks Ted! Any suggestions on sourcing the exact header I will need as well? I just sold my modded Emax 1 HD SE. I still have the rack and keyboard Emax II's. They both could use a new display.
Perhaps Jammie might have some more insight as to whether these will work with the EII's? I seem to recall him saying that he has serviced some of them before.
Regards,
-s*
On Wed, Sep 24, 2014 at 8:18 PM, Ted Summers djtbs1@gmail.com [emax] <emax@yahoogroups.com> wrote:
The raystar is a drop in for Emax 1 (key and rack), and Emax 2 (key and rack)
You have to buy a header as they don't have them attached.I have personally installed them in all 4 of the above, but not an Emulator (as I haven't got one, and never serviced one).-TOn Sep 24, 2014, at 10:48 AM, 'bmacdoug1 .' jasonmcdougal@... [emax] wrote:
Drop in replacement for the EMAX I rack mounted version, not sure about other applications.On Wed, Sep 24, 2014 at 10:43 AM, Scott Stanley scartattack@... [emax] <emax@yahoogroups.com> wrote:Is this a drop in replacement? I'd like to replace the display in my Emax II and Emulator II.Regards,-s*On Wed, Sep 24, 2014 at 12:56 PM, 'bmacdoug1 .' jasonmcdougal@... [emax] <emax@yahoogroups.com> wrote:This is what you need:
http://www.tme.eu/en/details/rec001602cwpp5n0/alphanumeric-oled-displays/raystar-optronics/rec001602cwpp5n00000/
RAYSTAR OPTRONICS REC001602CWPP5N00000 Display: OLED; alphanumeric; 16x2; white; Dimensions:85x36x10mmOn Wed, Sep 24, 2014 at 2:10 AM, andre@... [emax] <emax@yahoogroups.com> wrote:I finally have an Emax rack and would like to change the display as the backlight is dim. The most important thing is that this fits in the rack casing without altering or cutting the PCB. I am not afraid of using cables to extend anything so it does not need to have the connections on the side. White characters with blue backlight preferred, as well as a distributor in Europe as I am in Germany. Any hints? Cheers, Andre!
--