Datacolor User to User Support Group.

 > wrote:

> Okay, I guess I have had my Spyder3 Elite long enough for a few  
> questions to start popping up.  I would like to start with  two of  
> the tabs under the Preferences screen.
>
> Running version 3.0.7 of the software:
> Under the “Certification” Tab:
>      Check Certification is set to 1 hour
>      Confirm “CheckCal” is set to 2 weeks
>      Confirm “FullCal” is set to 1 month
>
> Under the Recalibration” Tab:
>      Check “ReCal” is set to 1 hour
>      Notify if monitor has not been recalibrated (ReCal) within the  
> last:  and is set to 1 month
>
> I guess I am confused by these two tabs as it looks as if some of  
> the two are redundant.
>
> What I want to do is:
> Do a full calibration once a month and check that calibration every  
> two weeks.  I only want to be notified if it is time for or I have  
> miss a bi-weekly Calibration Check and a Monthly Full Calibration.
>
> I am not really sure what certification means unless it is to  
> certify that the last full calibration is still valid via a checking  
> of the calibration.
>
> Any help or clarification would be appreciated.
>
> Regards,
> Thomas Rollins
> http://www.pbase.com/American_Imagery
>
>