Synth-DIY Yahoo! Groups Archives

Re: [SPAM] [cgs_synth] Gate Seq - no pulse at output

2009-05-17 by sasami@hotkey.net.au

I would not expect a bad one to pass anything. It sounds more like you have
a power rail that isn't connected.

Ken

Show quoted textHide quoted text

>I'm getting full out w/ either switch position, and from either output

(both pulse and full/mix) on my gate seq. I'm guessing it's the 4081, but I
don't have a spare to test it.

>would a bad 4081 still allow the signal to pass? (just trying to be sure

I'm on the right track before I make the trek to the electronics store)

>
>thanks
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Re: [SPAM] [cgs_synth] Gate Seq - no pulse at output

2009-05-18 by synthwick

That's not it. I tested it at the pins of the 4081, and do have power.
It would have to be a problem on the buffer circuit, right? Everything else seems to be working.
I just double checked all of my connections, and they are all good, and go where they are supposed to.

Well, there isn't much to the circuit, I'll just get parts to rebuild the entire buffer board.
If you have any other advice, I'll take it. Otherwise I'll post results after I've tried a few new parts.

thanks!

Show quoted textHide quoted text

--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>
> I would not expect a bad one to pass anything. It sounds more like you have
> a power rail that isn't connected.
>
> Ken
>
> >I'm getting full out w/ either switch position, and from either output
> (both pulse and full/mix) on my gate seq. I'm guessing it's the 4081, but I
> don't have a spare to test it.
> >would a bad 4081 still allow the signal to pass? (just trying to be sure
> I'm on the right track before I make the trek to the electronics store)
> >
> >thanks
> >
> >
> >
> >------------------------------------
> >
> >The CGS Modular Synth home page: http://www.cgs.synth.net/
> >Yahoo! Groups Links
> >
> >
> >
> >
> _______________________________________________________________________
> Ken Stone sasami@... otherunicorn@...
> Modular Synth PCBs for sale <http://www.cgs.synth.net/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>

Cgs synth

Re: [SPAM] [cgs_synth] Gate Seq - no pulse at output

Re: [SPAM] [cgs_synth] Gate Seq - no pulse at output

Re: [SPAM] [cgs_synth] Gate Seq - no pulse at output

Move to quarantaine