I would not expect a bad one to pass anything. It sounds more like you have
a power rail that isn't connected.
Ken
don't have a spare to test it.
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
a power rail that isn't connected.
Ken
>I'm getting full out w/ either switch position, and from either output(both pulse and full/mix) on my gate seq. I'm guessing it's the 4081, but I
don't have a spare to test it.
>would a bad 4081 still allow the signal to pass? (just trying to be sureI'm on the right track before I make the trek to the electronics store)
>_______________________________________________________________________
>thanks
>
>
>
>------------------------------------
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>Yahoo! Groups Links
>
>
>
>
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>