Cgs synth

I forgot to ask:



What about power supply? Do I need to regulate anything to run with a
doepfer diy kit #1 power supply?
http://www.analoguehaven.com/doepfer/a100diy1/



This doesn't look like too difficult of a build. Is it? This will be my
first proper build. I've circuit bent a few pedals before. In the case
that I don't have the time/patience, would someone be willing to build this
for me? For compensation, of course.



Thanks again!





-----Original Message-----
From: cgs_synth@yahoogroups.com [mailto:cgs_synth@yahoogroups.com] On Behalf
Of Dave Kendall
Sent: Tuesday, August 19, 2008 3:03 AM
To: cgs_synth@yahoogroups.com
Subject: Re: [cgs_synth] Tube VCA / Timbral Gate



It's longer than will fit vertically behind a eurorack module, but can
be cut in half and the connections re-joined. The pads are already on
the board for this very purpose.
I just mounted mine horizontally on an "L" bracket.

PS - Do fit a feedback pot as suggested by Ken on the CGS site. It's
well worth it ;-)

cheers,
Dave

On Aug 18, 2008, at 19:57, melodayage wrote:

> hey guys. newbie questions: how big is the pcb of the Tube VCA/Timbral
> Gate? Will it fit the eurorack format? any potential problems of
> mouting and running it with a eurorack modules/doepfer power supply?
>
> thanks!
>
>
>
>





[Non-text portions of this message have been removed]