MTM latency
2014-10-19 by airflamesred@...
Has anyone done a latency check on an MTM? Just wondering how far things have come.
Thread
MTM latency
Re: [Simmons Drums] MTM latency
2014-10-19 by Nick Zampiello
i have a TMI that always felt a little latent.
BUT. it's still better than the old Alesis D4 which was so late it was unplayable ( as a drummer )
NEW ALLIANCE EAST!!!!
--------------------------------------
New Alliance East - Mastering
New Alliance East - Facebook
X :::: B :::: S
--------------------------------------
New Alliance East - Mastering
New Alliance East - Facebook
X :::: B :::: S
On Sunday, October 19, 2014 4:37 PM, "airflamesred@... [Simmons_Drums]" <Simmons_Drums@yahoogroups.com> wrote:
Has anyone done a latency check on an MTM? Just wondering how far things have come.
Re : [Simmons Drums] MTM latency
2014-10-20 by Jacquot.Patrice@...
Hi there,
It depends if you trigger by midi (quite some latency then) or in direct trig inputs...
----- Mail d'origine -----
De: airflamesred@... [Simmons_Drums] <Simmons_Drums@yahoogroups.com>
À: Simmons Drums <Simmons_Drums@yahoogroups.com>
Envoyé: Sun, 19 Oct 2014 22:14:57 +0200 (CEST)
Objet: [Simmons Drums] MTM latency
It depends if you trigger by midi (quite some latency then) or in direct trig inputs...
----- Mail d'origine -----
De: airflamesred@... [Simmons_Drums] <Simmons_Drums@yahoogroups.com>
À: Simmons Drums <Simmons_Drums@yahoogroups.com>
Envoyé: Sun, 19 Oct 2014 22:14:57 +0200 (CEST)
Objet: [Simmons Drums] MTM latency
Has anyone done a latency check on an MTM? Just wondering how far things have come.
Re: Re : [Simmons Drums] MTM latency
2014-10-20 by edrose1@...
Trig Out Latency is just under 4ms; MIDI Out Latency is just over 4ms. Check out the picture in the Photos section.
Re: Re : [Simmons Drums] MTM latency
2014-10-21 by philmurr@...
That looks nice - what are you using for your scope display ?
Re: Re : [Simmons Drums] MTM latency
2014-10-21 by edrose1@...
I did this with ProTools as I wanted to capture all three transients. My digital scope can only handle two inputs.
Re : Re: Re : [Simmons Drums] MTM latency
2014-10-21 by Jacquot.Patrice@...
:) clever mate ...
----- Mail d'origine -----
De: edrose1@... [Simmons_Drums] <Simmons_Drums@yahoogroups.com>
À: Simmons Drums <Simmons_Drums@yahoogroups.com>
Envoyé: Tue, 21 Oct 2014 17:47:34 +0200 (CEST)
Objet: Re: Re : [Simmons Drums] MTM latency
I did this with ProTools as I wanted to capture all three transients. My digital scope can only handle two inputs.
----- Mail d'origine -----
De: edrose1@... [Simmons_Drums] <Simmons_Drums@yahoogroups.com>
À: Simmons Drums <Simmons_Drums@yahoogroups.com>
Envoyé: Tue, 21 Oct 2014 17:47:34 +0200 (CEST)
Objet: Re: Re : [Simmons Drums] MTM latency
I did this with ProTools as I wanted to capture all three transients. My digital scope can only handle two inputs.
Re: Re : Re: Re : [Sim mons Drums] MTM latency
2014-10-21 by airflamesred@...
Just to be clear on this Ed, the pad out is the mic recording the surface hit to pro tools?
And thanks very much for taking the time.
Re: Re : Re: Re : [Sim mons Drums] MTM latency
2014-10-22 by edrose1@...
No. It's from the output of the pad.