Yahoo Groups archive

Vintage Simmons Drums (UK) Users Group

Archive for Simmons_Drums.

Index last updated: 2026-03-30 01:08 UTC

Thread

Re: Re : [Simmons Drums] SDS3 pa ds connector

Re: Re : [Simmons Drums] SDS3 pa ds connector

2014-07-13 by Michael Buchner


What I forgot:
 
If you want to set up the original pads: There is a master pair of pads with the DIN out. You need a DIN/DIN with all 5 pins connected, pin 2 is the shield/ground. The slave pad pair is connected to the master pair with a stereo jack cable.
 
Best
 
Michael
 
 
 
----- Original Message -----
Sent: Saturday, July 12, 2014 10:55 PM
Subject: Re: Re : [Simmons Drums] SDS3 pads connector

 

It´s the first thing I´ve thinking about but the only one from a hi-fi stuff I have is DIN in one side and RCA in the the other

Re: Re : [Simmons Drums] SDS3 pads connector

2014-07-14 by ALFONSO PACHES

O.K.
Thanks, Micha!


El Domingo 13 de julio de 2014 16:40, "'Michael Buchner' buchnerelectronics@... [Simmons_Drums]" <Simmons_Drums@yahoogroups.com> escribió:


 

What I forgot:
 
If you want to set up the original pads: There is a master pair of pads with the DIN out. You need a DIN/DIN with all 5 pins connected, pin 2 is the shield/ground. The slave pad pair is connected to the master pair with a stereo jack cable.
 
Best
 
Michael
 
 
 
----- Original Message -----
Sent: Saturday, July 12, 2014 10:55 PM
Subject: Re: Re : [Simmons Drums] SDS3 pads connector

 
It´s the first thing I´ve thinking about but the only one from a hi-fi stuff I have is DIN in one side and RCA in the the other


Re: Re : [Simmons Drums] SDS3 pads connector

2014-07-14 by ALFONSO PACHES

Yes, Micha, I know that. It comes wrote in a sticker under the master pair of pads. Thanks a lot for all the information


El Lunes 14 de julio de 2014 7:28, ALFONSO PACHES <alfpaches@...> escribió:


O.K.
Thanks, Micha!


El Domingo 13 de julio de 2014 16:40, "'Michael Buchner' buchnerelectronics@... [Simmons_Drums]" <Simmons_Drums@yahoogroups.com> escribió:


 

What I forgot:
 
If you want to set up the original pads: There is a master pair of pads with the DIN out. You need a DIN/DIN with all 5 pins connected, pin 2 is the shield/ground. The slave pad pair is connected to the master pair with a stereo jack cable.
 
Best
 
Michael
 
 
 
----- Original Message -----
Sent: Saturday, July 12, 2014 10:55 PM
Subject: Re: Re : [Simmons Drums] SDS3 pads connector

 
It´s the first thing I´ve thinking about but the only one from a hi-fi stuff I have is DIN in one side and RCA in the the other