Yahoo Groups archive

Vintage Simmons Drums (UK) Users Group

Index last updated: 2026-04-03 01:20 UTC

Thread

SIMMONS SDSV Rack Ears?

SIMMONS SDSV Rack Ears?

2011-04-16 by chris

I have an original Simmons SDSV brain with the standard metal case.  When I took it apart to do some repairs I noticed that there were some pre-drilled holes on the sides of the interior casing.  Upon further research I found that a few people had mounted their units in racks using rack ears.  My outer casing is pretty banged up and I'd really like to rack mount the SDSV.  Does anyone have any suggestions on where to get a rack kit for the SDSV?  Was there one made by Simmons?  Does anyone have a kit that they'd sell me?  Please let me know

Re: SIMMONS SDSV Rack Ears?

2011-04-16 by superwolle70

I use a rack tub: http://www.thomann.de/gb/thon_rackwanne_3he.htm
I don't trust in rack ears (which I cannot justify...)

--- In Simmons_Drums@yahoogroups.com, "chris" <mimountains@...> wrote:
Show quoted textHide quoted text
>
> I have an original Simmons SDSV brain with the standard metal case.  When I took it apart to do some repairs I noticed that there were some pre-drilled holes on the sides of the interior casing.  Upon further research I found that a few people had mounted their units in racks using rack ears.  My outer casing is pretty banged up and I'd really like to rack mount the SDSV.  Does anyone have any suggestions on where to get a rack kit for the SDSV?  Was there one made by Simmons?  Does anyone have a kit that they'd sell me?  Please let me know
>

Re: [Simmons Drums] SIMMONS SDSV Rack Ears?

2011-04-16 by jesper

chris skrev 2011-04-16 19:51:
> I have an original Simmons SDSV brain with the standard metal case. When
> I took it apart to do some repairs I noticed that there were some
> pre-drilled holes on the sides of the interior casing. Upon further
> research I found that a few people had mounted their units in racks
> using rack ears. My outer casing is pretty banged up and I'd really like
> to rack mount the SDSV. Does anyone have any suggestions on where to get
> a rack kit for the SDSV? Was there one made by Simmons? Does anyone have
> a kit that they'd sell me? Please let me know

Yes, those holes are intended for rack ears.
Yes, Simmons had sets for sale.
Yes, they seldom show up.
No, I have none to sell...

But... I've checked with other rack ears and I remember I have a set 
that just needed one new hole per ear to fit. I think it came with my 
Doepfer Drehbank.

Or, check with your local metal shop. I bet they can construct a pair 
for you.

-- 
electronically yours, jesper

- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se

Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

2011-04-16 by jesper

superwolle70 skrev 2011-04-16 20:46:
> I use a rack tub: http://www.thomann.de/gb/thon_rackwanne_3he.htm
> I don't trust in rack ears (which I cannot justify...)

*haha* Talk about trust then. My SDS-V resides on top of my SDS-7 which 
resides on top of my Knüttel EPU (which has ears built in). I'm I 
pushing my luck too far? :D

-- 
electronically yours, jesper

- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se

[Simmons Drums] Re: SIMMONS SDSV Rack Ears?

2011-04-16 by superwolle70

If I had original rack ears I would trust them, too. But I don't and the tub is also a reliable and reasonable solution 

--- In Simmons_Drums@yahoogroups.com, jesper <jesper@...> wrote:
Show quoted textHide quoted text
>
> superwolle70 skrev 2011-04-16 20:46:
> > I use a rack tub: http://www.thomann.de/gb/thon_rackwanne_3he.htm
> > I don't trust in rack ears (which I cannot justify...)
> 
> *haha* Talk about trust then. My SDS-V resides on top of my SDS-7 which 
> resides on top of my Knüttel EPU (which has ears built in). I'm I 
> pushing my luck too far? :D
> 
> -- 
> electronically yours, jesper
> 
> - -- --- ---- ----- ---- --- -- -
> www.electronic-obsession.se
>

Re: SIMMONS SDSV Rack Ears?

2011-04-17 by Roland

A trip to the hardware store for some aluminum angle iron is the simplest. All you need is a drill and some screws after that. Since the V is shallow and relatively light weight ( as compared to stuff like amps ), you won't need to support the back end either. If that's not possible for you, let me know and I'll make up a set for you ( I have plenty of stock ).

GOOD LUCK !! 

- Roland

--- In Simmons_Drums@yahoogroups.com, "chris" <mimountains@...> wrote:
Show quoted textHide quoted text
>
> I have an original Simmons SDSV brain with the standard metal case.  When I took it apart to do some repairs I noticed that there were some pre-drilled holes on the sides of the interior casing.  Upon further research I found that a few people had mounted their units in racks using rack ears.  My outer casing is pretty banged up and I'd really like to rack mount the SDSV.  Does anyone have any suggestions on where to get a rack kit for the SDSV?  Was there one made by Simmons?  Does anyone have a kit that they'd sell me?  Please let me know
>

Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

2011-04-17 by chris puidokas

Roland,
Nice to talk to you!  That would be amazing if you could make a pair up for me!  
Let me know how much you'd want and I could paypal it to you.  Would it be 
possible for you to fabricate it in a metal similar to the stainless aluminum 
look of the SDSV panels?  Let me know and thank you so much for responding!

-chris  





________________________________
Show quoted textHide quoted text
From: Roland <rolandbrenner@...>
To: Simmons_Drums@yahoogroups.com
Sent: Sun, April 17, 2011 11:01:56 AM
Subject: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

  
A trip to the hardware store for some aluminum angle iron is the simplest. All 
you need is a drill and some screws after that. Since the V is shallow and 
relatively light weight ( as compared to stuff like amps ), you won't need to 
support the back end either. If that's not possible for you, let me know and 
I'll make up a set for you ( I have plenty of stock ).

GOOD LUCK !! 

- Roland

--- In Simmons_Drums@yahoogroups.com, "chris" <mimountains@...> wrote:
>
> I have an original Simmons SDSV brain with the standard metal case.  When I 
>took it apart to do some repairs I noticed that there were some pre-drilled 
>holes on the sides of the interior casing.  Upon further research I found that a 
>few people had mounted their units in racks using rack ears.  My outer casing is 
>pretty banged up and I'd really like to rack mount the SDSV.  Does anyone have 
>any suggestions on where to get a rack kit for the SDSV?  Was there one made by 
>Simmons?  Does anyone have a kit that they'd sell me?  Please let me know
>


 

[Non-text portions of this message have been removed]

Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

2011-04-17 by matthew dutton

Hi,
Sorry to jump on a thread but i am having the same issues, i have a Sds-V and 
use it fairly regularly at gigs. So i've decided it needs a rack mounted flight 
case so i can stop worrying everytime i see our TM pick it up. 
Do you think you could make me a pair of ears? i would be more that happy to 
pay, i just seem a bit lost as to which ones to get online. I have a carry case 
ready with a rack but just haven't managed to finish the job.

Matt



________________________________
Show quoted textHide quoted text
From: Roland <rolandbrenner@netzero.net>
To: Simmons_Drums@yahoogroups.com
Sent: Sun, April 17, 2011 4:01:56 PM
Subject: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

  
A trip to the hardware store for some aluminum angle iron is the simplest. All 
you need is a drill and some screws after that. Since the V is shallow and 
relatively light weight ( as compared to stuff like amps ), you won't need to 
support the back end either. If that's not possible for you, let me know and 
I'll make up a set for you ( I have plenty of stock ).

GOOD LUCK !! 

- Roland

--- In Simmons_Drums@yahoogroups.com, "chris" <mimountains@...> wrote:
>
> I have an original Simmons SDSV brain with the standard metal case.  When I 
>took it apart to do some repairs I noticed that there were some pre-drilled 
>holes on the sides of the interior casing.  Upon further research I found that a 
>few people had mounted their units in racks using rack ears.  My outer casing is 
>pretty banged up and I'd really like to rack mount the SDSV.  Does anyone have 
>any suggestions on where to get a rack kit for the SDSV?  Was there one made by 
>Simmons?  Does anyone have a kit that they'd sell me?  Please let me know
>


 

[Non-text portions of this message have been removed]

Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

2011-04-18 by WT

Same here.

2 kits wanted.

WT

----- Original Message -----
Show quoted textHide quoted text
From: "chris puidokas" <mimountains@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Sunday, April 17, 2011 10:08 PM
Subject: Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?


> Roland,
> Nice to talk to you!  That would be amazing if you could make a pair up 
> for me!
> Let me know how much you'd want and I could paypal it to you.  Would it be
> possible for you to fabricate it in a metal similar to the stainless 
> aluminum
> look of the SDSV panels?  Let me know and thank you so much for 
> responding!
>
> -chris
>
>
>
>
>
> ________________________________
> From: Roland <rolandbrenner@...>
> To: Simmons_Drums@yahoogroups.com
> Sent: Sun, April 17, 2011 11:01:56 AM
> Subject: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?
>
>
> A trip to the hardware store for some aluminum angle iron is the simplest. 
> All
> you need is a drill and some screws after that. Since the V is shallow and
> relatively light weight ( as compared to stuff like amps ), you won't need 
> to
> support the back end either. If that's not possible for you, let me know 
> and
> I'll make up a set for you ( I have plenty of stock ).
>
> GOOD LUCK !!
>
> - Roland
>
> --- In Simmons_Drums@yahoogroups.com, "chris" <mimountains@...> wrote:
>>
>> I have an original Simmons SDSV brain with the standard metal case.  When 
>> I
>>took it apart to do some repairs I noticed that there were some 
>>pre-drilled
>>holes on the sides of the interior casing.  Upon further research I found 
>>that a
>>few people had mounted their units in racks using rack ears.  My outer 
>>casing is
>>pretty banged up and I'd really like to rack mount the SDSV.  Does anyone 
>>have
>>any suggestions on where to get a rack kit for the SDSV?  Was there one 
>>made by
>>Simmons?  Does anyone have a kit that they'd sell me?  Please let me know
>>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

[Simmons Drums] Re: SIMMONS SDSV Rack Ears?

2011-04-18 by Roland

For some reason, my main email is being rejected in this group. If you all need these, efficiently I will make as many as needed and make a few extras. I'm not a profiteer, collector, or hoarder. All I ask is for the cost of shipping and that you might throw this dog a bone. In the meantime, contact me through the FB Simmons channel: http://www.facebook.com/#!/simmons.drums.fans

--- In Simmons_Drums@yahoogroups.com, "WT" <waveterm@...> wrote:
Show quoted textHide quoted text
>
> Same here.
> 
> 2 kits wanted.
> 
> WT
> 
> ----- Original Message ----- 
> From: "chris puidokas" <mimountains@...>
> To: <Simmons_Drums@yahoogroups.com>
> Sent: Sunday, April 17, 2011 10:08 PM
> Subject: Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?
> 
> 
> > Roland,
> > Nice to talk to you!  That would be amazing if you could make a pair up 
> > for me!
> > Let me know how much you'd want and I could paypal it to you.  Would it be
> > possible for you to fabricate it in a metal similar to the stainless 
> > aluminum
> > look of the SDSV panels?  Let me know and thank you so much for 
> > responding!
> >
> > -chris
> >
> >
> >
> >
> >
> > ________________________________
> > From: Roland <rolandbrenner@...>
> > To: Simmons_Drums@yahoogroups.com
> > Sent: Sun, April 17, 2011 11:01:56 AM
> > Subject: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?
> >
> >
> > A trip to the hardware store for some aluminum angle iron is the simplest. 
> > All
> > you need is a drill and some screws after that. Since the V is shallow and
> > relatively light weight ( as compared to stuff like amps ), you won't need 
> > to
> > support the back end either. If that's not possible for you, let me know 
> > and
> > I'll make up a set for you ( I have plenty of stock ).
> >
> > GOOD LUCK !!
> >
> > - Roland
> >
> > --- In Simmons_Drums@yahoogroups.com, "chris" <mimountains@> wrote:
> >>
> >> I have an original Simmons SDSV brain with the standard metal case.  When 
> >> I
> >>took it apart to do some repairs I noticed that there were some 
> >>pre-drilled
> >>holes on the sides of the interior casing.  Upon further research I found 
> >>that a
> >>few people had mounted their units in racks using rack ears.  My outer 
> >>casing is
> >>pretty banged up and I'd really like to rack mount the SDSV.  Does anyone 
> >>have
> >>any suggestions on where to get a rack kit for the SDSV?  Was there one 
> >>made by
> >>Simmons?  Does anyone have a kit that they'd sell me?  Please let me know
> >>
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>

Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

2011-04-18 by jesper

WT skrev 2011-04-18 12:06:
> Same here.
>
> 2 kits wanted.

So, it seems like the list want to know. Give us all a figure including 
shipping. :)

-- 
electronically yours, jesper

- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se

Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

2011-04-18 by Matt Dutton

Hi, 
My shipping is to Manchester, uk. A price would be awesome and also a payment method? Paypal gift??
Cheers 
Matt

Sent from my iPhone

On 18 Apr 2011, at 15:20, jesper <jesper@...> wrote:

> WT skrev 2011-04-18 12:06:
> > Same here.
> >
> > 2 kits wanted.
> 
> So, it seems like the list want to know. Give us all a figure including 
> shipping. :)
> 
> -- 
> electronically yours, jesper
> 
> - -- --- ---- ----- ---- --- -- -
> www.electronic-obsession.se
> 


[Non-text portions of this message have been removed]

Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

2011-04-24 by chris puidokas

Hey Roland,
I was wondering if you ever managed to fabricate some SDSV ears?  If so, I'm 
still interested.  Thanks again.

-chris





________________________________
Show quoted textHide quoted text
From: Roland <rolandbrenner@...>
To: Simmons_Drums@yahoogroups.com
Sent: Sun, April 17, 2011 11:01:56 AM
Subject: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

  
A trip to the hardware store for some aluminum angle iron is the simplest. All 
you need is a drill and some screws after that. Since the V is shallow and 
relatively light weight ( as compared to stuff like amps ), you won't need to 
support the back end either. If that's not possible for you, let me know and 
I'll make up a set for you ( I have plenty of stock ).

GOOD LUCK !! 

- Roland

--- In Simmons_Drums@yahoogroups.com, "chris" <mimountains@...> wrote:
>
> I have an original Simmons SDSV brain with the standard metal case.  When I 
>took it apart to do some repairs I noticed that there were some pre-drilled 
>holes on the sides of the interior casing.  Upon further research I found that a 
>few people had mounted their units in racks using rack ears.  My outer casing is 
>pretty banged up and I'd really like to rack mount the SDSV.  Does anyone have 
>any suggestions on where to get a rack kit for the SDSV?  Was there one made by 
>Simmons?  Does anyone have a kit that they'd sell me?  Please let me know
>


 

[Non-text portions of this message have been removed]

Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

2011-05-02 by Roland Brenner

Hey Chris ! I'll make some up, but I'm not sure exacly when. Are you in a big hurry for these ?  - Roland
Show quoted textHide quoted text
---------- Original Message ----------
From: chris puidokas <mimountains@...>
To: Simmons_Drums@yahoogroups.com
Subject: Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?
Date: Sun, 24 Apr 2011 13:57:10 -0700 (PDT)


<!--CTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dt--><p><span style="display: none;">�</span></p> <!--~-|**|PrettyHtmlStartT|**|-~--><div id="ygrp-mlmsg" style="position: relative;"><div id="ygrp-msg" style="z-index: 1;"><!--~-|**|PrettyHtmlEndT|**|-~--><div id="ygrp-text"><p>Hey Roland,<br>I was wondering if you ever managed to fabricate some SDSV ears? If so, I'm <br>still interested. Thanks again.<br><br>-chris<br><br>________________________________<br>From: Roland <<a href="mailto:rolandbrenner%40netzero.net">rolandbrenner@...</a>><br>To: <a href="mailto:Simmons_Drums%40yahoogroups.com">Simmons_Drums@yahoogroups.com</a><br>Sent: Sun, April 17, 2011 11:01:56 AM<br>Subject: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?<br><br>A trip to the hardware store for some aluminum angle iron is the simplest. All <br>you need is a drill and some screws after that. Since the V is shallow and <br>relatively light weight ( as compared to stuff like amps ), you won't need to <br>support the back end either. If that's not possible for you, let me know and <br>I'll make up a set for you ( I have plenty of stock ).<br><br>GOOD LUCK !! <br><br>- Roland<br><br>--- In <a href="mailto:Simmons_Drums%40yahoogroups.com">Simmons_Drums@yahoogroups.com</a>, "chris" <mimountains@...> wrote:<br>><br>> I have an original Simmons SDSV brain with the standard metal case. When I <br>>took it apart to do some repairs I noticed that there were some pre-drilled <br>>holes on the sides of the interior casing. Upon further research I found that a <br>>few people had mounted their units in racks using rack ears. My outer casing is <br>>pretty banged up and I'd really like to rack mount the SDSV. Does anyone have <br>>any suggestions on where to get a rack kit for the SDSV? Was there one made by <br>>Simmons? Does anyone have a kit that they'd sell me? Please let me know<br>><br><br>[Non-text portions of this message have been removed]<br><br></p></div><!--~-|**|PrettyHtmlStart|**|-~--><div style="color: #fff; height: 0;"></div><!--~-|**|PrettyHtmlEnd|**|-~--><!--~-|**|PrettyHtmlStart|**|-~--><!--~-|**|PrettyHtmlEnd|**|-~--><!-- end group email --></html>
____________________________________________________________
Penny Stock Jumping 3000%
Sign up to the #1 voted penny stock newsletter for free today!
http://thirdpartyoffers.netzero.net/TGL3231/4dbecdd92c60d1f9deest02duc

[Non-text portions of this message have been removed]

Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

2011-05-02 by chris puidokas

Hey Roland,
Thanks for getting back to me.  There's no real hurry, I just wanted to see if 
you were still willing to do it.  Thanks again.  Let me know how much you are 
going to want for them, shipped to Brooklyn too.  Talk to you soon.

-chris





________________________________
Show quoted textHide quoted text
From: Roland Brenner <rolandbrenner@...>
To: Simmons_Drums@yahoogroups.com
Sent: Mon, May 2, 2011 11:28:43 AM
Subject: Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

  
Hey Chris ! I'll make some up, but I'm not sure exacly when. Are you in a big 
hurry for these ?  - Roland

---------- Original Message ----------
From: chris puidokas <mimountains@...>
To: Simmons_Drums@yahoogroups.com
Subject: Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?
Date: Sun, 24 Apr 2011 13:57:10 -0700 (PDT)

 
Hey Roland,
I was wondering if you ever managed to fabricate some SDSV ears? If so, I'm 
still interested. Thanks again.

-chris

________________________________
From: Roland <rolandbrenner@...</a>><br>To: <a 
href="mailto:Simmons_Drums%40yahoogroups.com">Simmons_Drums@yahoogroups.com</a><br>Sent:
 Sun, April 17, 2011 11:01:56 AM<br>Subject: [Simmons Drums] Re: SIMMONS SDSV 
Rack Ears?<br><br>A trip to the hardware store for some aluminum angle iron is 
the simplest. All <br>you need is a drill and some screws after that. Since the 
V is shallow and <br>relatively light weight ( as compared to stuff like amps ), 
you won't need to <br>support the back end either. If that's not possible for 
you, let me know and <br>I'll make up a set for you ( I have plenty of stock 
).<br><br>GOOD LUCK !! <br><br>- Roland<br><br>--- In <a 
href="mailto:Simmons_Drums%40yahoogroups.com">Simmons_Drums@yahoogroups.com</a>, 
"chris" <mimountains@...> wrote:<br>><br>> I have an original 
Simmons SDSV brain with the standard metal case. When I <br>>took it apart to 
do some repairs I noticed that there were some pre-drilled <br>>holes on the 
sides of the interior casing. Upon further research I found that a <br>>few 
people had mounted their units in racks using rack ears. My outer casing is 
<br>>pretty banged up and I'd really like to rack mount the SDSV. Does anyone 
have <br>>any suggestions on where to get a rack kit for the SDSV? Was there 
one made by <br>>Simmons? Does anyone have a kit that they'd sell me? Please 
let me know<br>><br><br>[Non-text portions of this message have been 
removed]<br><br></p></div><!--~-|**|PrettyHtmlStart|**|-~--><div style="color: 
#fff; height: 
0;"></div><!--~-|**|PrettyHtmlEnd|**|-~--><!--~-|**|PrettyHtmlStart|**|-~--><!--~-|**|PrettyHtmlEnd|**|-~--><!--
 end group email --></html>
__________________________________________________________
Penny Stock Jumping 3000%
Sign up to the #1 voted penny stock newsletter for free today!
http://thirdpartyoffers.netzero.net/TGL3231/4dbecdd92c60d1f9deest02duc

[Non-text portions of this message have been removed]


 

[Non-text portions of this message have been removed]

Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

2011-05-03 by Roland Brenner

OK cool. Bear with me on that, yet send me a reminder once in a while. I should be able to do something within the next few weeks.   - Roland
Show quoted textHide quoted text
---------- Original Message ----------
From: chris puidokas <mimountains@...>
To: Simmons_Drums@yahoogroups.com
Subject: Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?
Date: Mon, 2 May 2011 08:53:38 -0700 (PDT)


#fff; height: 
0;"></div><!--~-|**|PrettyHtmlEnd|**|-~--><!--~-|**|PrettyHtmlStart|**|-~--><!--~-|**|PrettyHtmlEnd|**|-~--><!--
end group email --></html>
__________________________________________________________
Penny Stock Jumping 3000%
Sign up to the #1 voted penny stock newsletter for free today!
http://thirdpartyoffers.netzero.net/TGL3231/4dbecdd92c60d1f9deest02duc

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]



____________________________________________________________
Groupon\u2122 Official Site
1 ridiculously huge coupon a day. Get 50-90% off your city's best!
http://thirdpartyoffers.netzero.net/TGL3231/4dc03c099c86232fa0st01duc

[Non-text portions of this message have been removed]

Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

2011-05-03 by chris puidokas

awesome, thanks roland!





________________________________
Show quoted textHide quoted text
From: Roland Brenner <rolandbrenner@...>
To: Simmons_Drums@yahoogroups.com
Sent: Tue, May 3, 2011 1:30:20 PM
Subject: Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

  
OK cool. Bear with me on that, yet send me a reminder once in a while. I should 
be able to do something within the next few weeks.   - Roland

---------- Original Message ----------
From: chris puidokas <mimountains@...>
To: Simmons_Drums@yahoogroups.com
Subject: Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?
Date: Mon, 2 May 2011 08:53:38 -0700 (PDT)

#fff; height: 
0;"></div><!--~-|**|PrettyHtmlEnd|**|-~--><!--~-|**|PrettyHtmlStart|**|-~--><!--~-|**|PrettyHtmlEnd|**|-~--><!--

end group email --></html>
__________________________________________________________
Penny Stock Jumping 3000%
Sign up to the #1 voted penny stock newsletter for free today!
http://thirdpartyoffers.netzero.net/TGL3231/4dbecdd92c60d1f9deest02duc

[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

__________________________________________________________
Groupon\u2122 Official Site
1 ridiculously huge coupon a day. Get 50-90% off your city's best!
http://thirdpartyoffers.netzero.net/TGL3231/4dc03c099c86232fa0st01duc

[Non-text portions of this message have been removed]


 

[Non-text portions of this message have been removed]