Synth-DIY Yahoo! Groups Archives

Thread

SDS-V trigger problem

2011-02-16 by Jenna

Hello list,I just got this SDSV that seems to have Ch1 and Ch4 mixed up somehow. Any trigger that goes into channel 1 also triggers the fourth module and vice versa.Does anyone have a theory on what might have happened to it during shipping?
I have already tried disconnecting all the modules and putting them back, also tried switching places etc but the problem remains.Nothing obvious that I could discover when I opened up the back and examined the inputs either...:(
Thanks / Jenna 		 	   		  

[Non-text portions of this message have been removed]

Re: [Simmons Drums] SDS-V trigger problem

2011-02-17 by WT

Check backplane circuitboard for any short between triggerlines ( with all 
modules removed ).

ALso, check if the small plastic positioners are in the correct place in the 
connectors.

WT

----- Original Message -----

Show quoted textHide quoted text

From: "Jenna" <jennaone@...>
To: <simmons_drums@yahoogroups.com>
Sent: Wednesday, February 16, 2011 6:14 PM
Subject: [Simmons Drums] SDS-V trigger problem


>
> Hello list,I just got this SDSV that seems to have Ch1 and Ch4 mixed up 
> somehow. Any trigger that goes into channel 1 also triggers the fourth 
> module and vice versa.Does anyone have a theory on what might have 
> happened to it during shipping?
> I have already tried disconnecting all the modules and putting them back, 
> also tried switching places etc but the problem remains.Nothing obvious 
> that I could discover when I opened up the back and examined the inputs 
> either...:(
> Thanks / Jenna
>
> [Non-text portions of this message have been removed]
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

RE: [Simmons Drums] SDS-V trigger problem

2011-02-18 by Jenna

Thanks, I�ll get them out again *moan, sigh* and check. I just put a blank in slot no4 to avoid the problem in the meantime.
btw, why does it take like 12 hours before my messages show up on the list? Am I being punished for using a hotmail account?It feels like I am having a conversation from outer space (using paper cups and a wire).
/Jenna

To: Simmons_Drums@yahoogroups.com

Show quoted textHide quoted text

From: waveterm@...
Date: Thu, 17 Feb 2011 17:25:13 +0100
Subject: Re: [Simmons Drums] SDS-V trigger problem


















 



  


    
      
      
      Check backplane circuitboard for any short between triggerlines ( with all 

modules removed ).



ALso, check if the small plastic positioners are in the correct place in the 

connectors.



WT



----- Original Message ----- 

From: "Jenna" <jennaone@...>

To: <simmons_drums@yahoogroups.com>

Sent: Wednesday, February 16, 2011 6:14 PM

Subject: [Simmons Drums] SDS-V trigger problem



>

> Hello list,I just got this SDSV that seems to have Ch1 and Ch4 mixed up 

> somehow. Any trigger that goes into channel 1 also triggers the fourth 

> module and vice versa.Does anyone have a theory on what might have 

> happened to it during shipping?

> I have already tried disconnecting all the modules and putting them back, 

> also tried switching places etc but the problem remains.Nothing obvious 

> that I could discover when I opened up the back and examined the inputs 

> either...:(

> Thanks / Jenna

>

> [Non-text portions of this message have been removed]

>

>

>

> ------------------------------------

>

> Yahoo! Groups Links

>

>

>






    
     

    
    






   		 	   		  

[Non-text portions of this message have been removed]