Synth-DIY Yahoo! Groups Archives

Thread

SDSV input problem

2010-05-24 by d.conley@rocketmail.com

Hi guys
I've finally got round to testing my SDSV modules using the 1V inputs. I don't yet have cables to trigger from my SDS9 pads. 
I used the audio out from a synth to trigger. All fine apart from the toms in slots 5 and 6. Other modules are being triggered instead of those taking the input. 
Is this a module problem or possibly a chassis problem?
Do any of you guys offer servicing? I could maybe do with somebody tweaking it who knows what they are doing! I'm in the UK btw. 
Thanks. Dave

SDSV input problem

2010-05-25 by d.conley@rocketmail.com

Hi guys
I've finally got round to testing my SDSV modules using the 1V inputs. I don't yet have cables to trigger from my SDS9 pads. 
I used the audio out from a synth to trigger. All fine apart from the toms in slots 5 and 6. Other modules are being triggered instead of those taking the input. 
Is this a module problem or possibly a chassis problem?
Do any of you guys offer servicing? I could maybe do with somebody tweaking it who knows what they are doing! I'm in the UK btw. 
Thanks. Dave

Re: [Simmons Drums] SDSV input problem

2010-05-26 by WT

Try taking the module out and reseating it. Just check that the small 
positioner in the connector on the mainframe is present.

WT

----- Original Message -----

Show quoted textHide quoted text

From: <d.conley@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Monday, May 24, 2010 10:50 PM
Subject: [Simmons Drums] SDSV input problem


> Hi guys
> I've finally got round to testing my SDSV modules using the 1V inputs. I 
> don't yet have cables to trigger from my SDS9 pads.
> I used the audio out from a synth to trigger. All fine apart from the toms 
> in slots 5 and 6. Other modules are being triggered instead of those 
> taking the input.
> Is this a module problem or possibly a chassis problem?
> Do any of you guys offer servicing? I could maybe do with somebody 
> tweaking it who knows what they are doing! I'm in the UK btw.
> Thanks. Dave
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

Re: [Simmons Drums] SDSV input problem

2010-06-03 by d.conley@rocketmail.com

I reseated the modules and was still getting triggering problems. 
I then noticed an odd thing, if I turned down the pad sensetivity knobs it stopped. 
Is this normal as I thought the sens settings effected pad input only? 
Cheers.  Dave
--- In Simmons_Drums@yahoogroups.com, "WT" <waveterm@...> wrote:

Show quoted textHide quoted text

>
> Try taking the module out and reseating it. Just check that the small 
> positioner in the connector on the mainframe is present.
> 
> WT
> 
> ----- Original Message ----- 
> From: <d.conley@...>
> To: <Simmons_Drums@yahoogroups.com>
> Sent: Monday, May 24, 2010 10:50 PM
> Subject: [Simmons Drums] SDSV input problem
> 
> 
> > Hi guys
> > I've finally got round to testing my SDSV modules using the 1V inputs. I 
> > don't yet have cables to trigger from my SDS9 pads.
> > I used the audio out from a synth to trigger. All fine apart from the toms 
> > in slots 5 and 6. Other modules are being triggered instead of those 
> > taking the input.
> > Is this a module problem or possibly a chassis problem?
> > Do any of you guys offer servicing? I could maybe do with somebody 
> > tweaking it who knows what they are doing! I'm in the UK btw.
> > Thanks. Dave
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>