Vintage Simmons Drums (UK) Users Group

> I have sds7 and mtm, recently I made myself "selector pad" cable
> connecting mtm and sds7 but it's not working. I soldered pin 1 to 1, 2
> to 2 etc. Anybody have any idea of pinout for this thing or maybe
> somebody have the original cable? Lasse, help me, please, people say
> you have mtm and sds7...
> Have a nice day, Adam
> Lewandowski

Hi Adam,

While it´s true tht I have bought both a SDS-7 and a MTM, I have yet to
recieve them.

They should arrive shortly, but I doubt that I can tell you you how to wire
the cable just by looking at the units. If I recall correctly, there is no
information in the manuals as to how the cable should be wired. I would
assume that the cable should be wired pin to pin.

LJ

http://hem.spray.se/ppgwave/studiopics.html

Hi, you are right, I found it finally in mtm service manual but
problem still exists, it does't work...now I'll try to check the
"ground" in my rack, that's the only idea I have at the moment, thanks
for help, regards, Adam