Re: Bass Module Sd5
2007-04-05 by NYMOs
Hi Michael, This begs the question....how does one change a tom module into a hihat/cymbal module ?? Cheers N Y M O
Show quoted textHide quoted text
> 1. Bass Module SDS5 > Posted by: "michael.buchner@..." michael.buchner@... > mbuchner1234 > Date: Wed Apr 4, 2007 11:36 am ((PDT)) > > The bass module is the same pcb like snare, tom and analogue hh/cym. The LFO > is, like on toms, not fitted. The differences are: > Int. R25 full open means noise bend max, no filter res control (parts R74,10k > and pot R27 missing).R72 (controls amount of noise) is only 16k on bass. The > wire bridge a-middle-b near IC2 has to be set to pos a-middle. If you want to > change a tom module to a bass, you have to change only this. If you want to > change a snare to a bass, you have to remove the snares LFO (R52 - R61, C15, > TR 7, IC 16). If there is a 100nF capacitor fitted on the solder side for > creating the rimshots on snare, remove it too. On snare, there is no R118, > that has to be 270k on bass. For C17 choose 2n2, the original on snare is > smaller. > I hope, this will help. > Michael > > [Non-text portions of this message have been removed] > > >