Re: [Simmons Drums] drum stand advice
2005-02-17 by sovereigng@aol.com
Pearl stands fit Simmons.
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
Thread
Re: [Simmons Drums] drum stand advice
Re: [Simmons Drums] drum stand advice
2005-02-17 by mikehock12
are there specific stands?
what about the arms or tom holders. in simmons photos, some of them
loo realy long? what about the part that actually fits into the drum
pad? does it need to be a certain length? is there a certain width a
well?
thank you
mike
what about the arms or tom holders. in simmons photos, some of them
loo realy long? what about the part that actually fits into the drum
pad? does it need to be a certain length? is there a certain width a
well?
thank you
mike
Show quoted textHide quoted text
--- In Simmons_Drums@yahoogroups.com, sovereigng@a... wrote:
> Pearl stands fit Simmons.
>
>
> [Non-text portions of this message have been removed]
Re: [Simmons Drums] drum stand advice
2005-02-18 by sovereigng@aol.com
They appear to be very long because they're mounted backwards. Pearl
mounts have a long tube and a short tube joined together w/ an elbow.
[Non-text portions of this message have been removed]
mounts have a long tube and a short tube joined together w/ an elbow.
[Non-text portions of this message have been removed]
Re: [Simmons Drums] drum stand advice
2005-02-18 by david pinnington
i agree pearl stands were/are the bench mark for me
i have two simmons racks that basically wouldbe going spare that will hold 8-10 pc kits
but...........
when it come to serious gigging or even flexible setting up and strength and mounting accoustic harware such as a ride cymbal this is where they fail as the arms rotate round spars then again they are near 20 years old
i have two simmons racks that basically wouldbe going spare that will hold 8-10 pc kits
but...........
when it come to serious gigging or even flexible setting up and strength and mounting accoustic harware such as a ride cymbal this is where they fail as the arms rotate round spars then again they are near 20 years old
----- Original Message -----
Show quoted textHide quoted text
From: sovereigng@...
To: Simmons_Drums@yahoogroups.com
Sent: Thursday, February 17, 2005 8:59 PM
Subject: Re: [Simmons Drums] drum stand advice
Pearl stands fit Simmons.
[Non-text portions of this message have been removed]
Yahoo! Groups Sponsor
ADVERTISEMENT
------------------------------------------------------------------------------
Yahoo! Groups Links
a.. To visit your group on the web, go to:
http://groups.yahoo.com/group/Simmons_Drums/
b.. To unsubscribe from this group, send an email to:
Simmons_Drums-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
[Non-text portions of this message have been removed]
Re: [Simmons Drums] drum stand advice
2005-02-18 by jesper@electronic-obsession.se
But there are different rules for different kind of pads... maybe that's
something for the site Paul?
The SDS-3/4 fits on what I've learned to call Tamastands. Those pencil-thick
metal rods.
Same with Pollard by the way so maybe that was the way to go in the late
70's...
electronically yours, jesper
- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se
something for the site Paul?
The SDS-3/4 fits on what I've learned to call Tamastands. Those pencil-thick
metal rods.
Same with Pollard by the way so maybe that was the way to go in the late
70's...
electronically yours, jesper
- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se
----- Original Message -----
Show quoted textHide quoted text
From: "david pinnington" <davep@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Friday, February 18, 2005 8:31 AM
Subject: Re: [Simmons Drums] drum stand advice
>
> i agree pearl stands were/are the bench mark for me
> i have two simmons racks that basically wouldbe going spare that will hold
8-10 pc kits
> but...........
> when it come to serious gigging or even flexible setting up and strength
and mounting accoustic harware such as a ride cymbal this is where they fail
as the arms rotate round spars then again they are near 20 years old
> ----- Original Message -----
> From: sovereigng@...
> To: Simmons_Drums@yahoogroups.com
> Sent: Thursday, February 17, 2005 8:59 PM
> Subject: Re: [Simmons Drums] drum stand advice
>
>
> Pearl stands fit Simmons.
>
>
> [Non-text portions of this message have been removed]
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
>
> --------------------------------------------------------------------------
----
> Yahoo! Groups Links
>
> a.. To visit your group on the web, go to:
> http://groups.yahoo.com/group/Simmons_Drums/
>
> b.. To unsubscribe from this group, send an email to:
> Simmons_Drums-unsubscribe@yahoogroups.com
>
> c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>