Thank you for the info! Great! I hope, they have
some in stock. I will try to get some, when my holidays are over. May be they
sell some CA3080 too...
----- Original Message -----From: Dennis MatanaSent: Monday, December 16, 2013 5:31 PMSubject: Re: [Simmons Drums] Musicaid Claptrap schematics
15 euro for an LM566? http://www.futurlec.com/Linear/LM566CNpr.shtml $ 1,25 a piece (Y)
On Monday, December 16, 2013 4:13 AM, Michael Buchner <buchnerelectronics@...> wrote:This is the schematics of the Mark 2 (analogue Simmons ClapTrap), the humaniser is already built in. It was a great idea to use the AC frequency from the PSU to modulate the VCO. A free LFO! This is the Simmons spirit!Also bad, that the LM566 (VCO) is so expensive these days. Back in the days, you could buy it for a few cents. Now they want 15 Euro or more.----- Original Message -----From: Chris WarehamSent: Monday, December 16, 2013 4:30 AMSubject: Re: [Simmons Drums] Musicaid Claptrap schematicsWT said on 15/12/13 15:22:
> Cool !
>
> Can you scan it and upload it ?
>
> WT
>
Hi!
I've uploaded the schematic to the existing "Analog Claptrap" directory
in the files section of the Yahoo group. I'll quote below the
description that I added to the file:
"Simmons Analog Clap Trap schematic. There is no attribution or
copyright on the schematic. I assume this was distributed by Simmons as
an aid to service engineers, and is therefore freely distributable."
It's a 300 dpi scan, so should be suitable for printing on A4 sized paper.
Cheers,
Chris