Vintage Simmons Drums (UK) Users Group

talking about that , 

I remember having read a note 

 "if you intend to put more than 5 cymbals modules  in the SDSV. Please contact Simmons for a highered powered rack if 7 cymbals are required in a rack"
 
"& do not fit cymbal or hihat in Channel 1 position as the 5v regulator on the piggyback board could short on the left hand cheek of the chassis"

so there's quite some concern about that cymbal / hihat cards power feeding.

Even if if it's not the problem yet , why not increasing  the PSU caps, in the same time, so you have a better reserve ?


Good luck





----- Mail d'origine -----
De: jesper <jesper@...>
À: Simmons Drums <Simmons_Drums@yahoogroups.com>
Envoyé: Thu, 07 Mar 2013 09:59:29 +0100 (CET)
Objet: Re: [Simmons Drums] Today's repair...





 Nick Zampiello skrev 2013-03-06 16:11:

> yes, but maybe the fact that this card actually has a higher current

> demand may be problematic as well.

>

> especially if it's a crude digital circuit that needs enough to be passable.


Good point - will keep that in mind and check for ripples/fluctuations 

if necessary.


-- 

electronically yours, jesper


- -- --- ---- ----- ---- --- -- -

www.electronic-obsession.se




[Non-text portions of this message have been removed]