Vintage Simmons Drums (UK) Users Group

----- Original Message ----- 
From: <jesper@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Thursday, August 19, 2004 9:16 PM
Subject: Re: [Simmons Drums] SDS7 problem


> adam:
> > yes, I have a volt meter, ohm meter etc.
>
> With the SDS-7 powered and a selector cable in place, can you check if you
> get any weird voltages on different pins... and with power off, check for
> short circuits between pins...
>
> These are just guesses since I don't own a SDS-7, but it sounds like there
> are stuff happening on the pins involving program 7 and 16 that shouldn't
> happen...
>
> Lasse, any inputs on the issue?

Yes, you can rearrange the order in the SDS-7.

Press pad 4 = patch 39.
Press pad 9 = patch 22

and so on....

As for the MTM, it will always select the same numbered patch as the pad you
press. I.e. press pad 1 = MTM patch 1. Press pad 5 = MTM patch 5.

Try to reprogram the order in which the SDS assign programs to selector
pads.

Do you have the manual ?

LJ

http://hem.spray.se/ppgwave/studiopics.html