Vintage Simmons Drums (UK) Users Group

i just bought an sds 5 and from what i see its what they call puck board at the arenas as i do this for a living .if  you get some used puck boad the otherside might be good and this might be cheaper for you.you can cut it using a normal table saw blade as i have done this before making my pads from scratch using a mold and fiberglass for shells
lfpaches <alfpaches@yahoo.es>
To: Simmons_Drums@yahoogroups.com 
Sent: Monday, February 13, 2012 7:21 AM
Subject: [Simmons Drums] mark II polycarbonate surfaces


  
Hi list
I´m thinking about to replace the polycarbonate surfaces from my sdsv pads. I know about a company called MAKROLON. They make polycarbonate sheets but I don´t know if it´s necessary to buy a complete sheet or they could to cut the sheets according to the hexagonal pad shape.
If the last thing isn´t possible, somebody knows what kind of tool is required to cut polycarbonate ?. 
Thanks in advance




[Non-text portions of this message have been removed]