Vintage Simmons Drums (UK) Users Group

For some reason, my main email is being rejected in this group. If you all need these, efficiently I will make as many as needed and make a few extras. I'm not a profiteer, collector, or hoarder. All I ask is for the cost of shipping and that you might throw this dog a bone. In the meantime, contact me through the FB Simmons channel: http://www.facebook.com/#!/simmons.drums.fans

--- In Simmons_Drums@yahoogroups.com, "WT" <waveterm@...> wrote:
>
> Same here.
> 
> 2 kits wanted.
> 
> WT
> 
> ----- Original Message ----- 
> From: "chris puidokas" <mimountains@...>
> To: <Simmons_Drums@yahoogroups.com>
> Sent: Sunday, April 17, 2011 10:08 PM
> Subject: Re: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?
> 
> 
> > Roland,
> > Nice to talk to you!  That would be amazing if you could make a pair up 
> > for me!
> > Let me know how much you'd want and I could paypal it to you.  Would it be
> > possible for you to fabricate it in a metal similar to the stainless 
> > aluminum
> > look of the SDSV panels?  Let me know and thank you so much for 
> > responding!
> >
> > -chris
> >
> >
> >
> >
> >
> > ________________________________
> > From: Roland <rolandbrenner@...>
> > To: Simmons_Drums@yahoogroups.com
> > Sent: Sun, April 17, 2011 11:01:56 AM
> > Subject: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?
> >
> >
> > A trip to the hardware store for some aluminum angle iron is the simplest. 
> > All
> > you need is a drill and some screws after that. Since the V is shallow and
> > relatively light weight ( as compared to stuff like amps ), you won't need 
> > to
> > support the back end either. If that's not possible for you, let me know 
> > and
> > I'll make up a set for you ( I have plenty of stock ).
> >
> > GOOD LUCK !!
> >
> > - Roland
> >
> > --- In Simmons_Drums@yahoogroups.com, "chris" <mimountains@> wrote:
> >>
> >> I have an original Simmons SDSV brain with the standard metal case.  When 
> >> I
> >>took it apart to do some repairs I noticed that there were some 
> >>pre-drilled
> >>holes on the sides of the interior casing.  Upon further research I found 
> >>that a
> >>few people had mounted their units in racks using rack ears.  My outer 
> >>casing is
> >>pretty banged up and I'd really like to rack mount the SDSV.  Does anyone 
> >>have
> >>any suggestions on where to get a rack kit for the SDSV?  Was there one 
> >>made by
> >>Simmons?  Does anyone have a kit that they'd sell me?  Please let me know
> >>
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
>