Vintage Simmons Drums (UK) Users Group

Hi,
Sorry to jump on a thread but i am having the same issues, i have a Sds-V and 
use it fairly regularly at gigs. So i've decided it needs a rack mounted flight 
case so i can stop worrying everytime i see our TM pick it up. 
Do you think you could make me a pair of ears? i would be more that happy to 
pay, i just seem a bit lost as to which ones to get online. I have a carry case 
ready with a rack but just haven't managed to finish the job.

Matt



________________________________
From: Roland <rolandbrenner@netzero.net>
To: Simmons_Drums@yahoogroups.com
Sent: Sun, April 17, 2011 4:01:56 PM
Subject: [Simmons Drums] Re: SIMMONS SDSV Rack Ears?

  
A trip to the hardware store for some aluminum angle iron is the simplest. All 
you need is a drill and some screws after that. Since the V is shallow and 
relatively light weight ( as compared to stuff like amps ), you won't need to 
support the back end either. If that's not possible for you, let me know and 
I'll make up a set for you ( I have plenty of stock ).

GOOD LUCK !! 

- Roland

--- In Simmons_Drums@yahoogroups.com, "chris" <mimountains@...> wrote:
>
> I have an original Simmons SDSV brain with the standard metal case.  When I 
>took it apart to do some repairs I noticed that there were some pre-drilled 
>holes on the sides of the interior casing.  Upon further research I found that a 
>few people had mounted their units in racks using rack ears.  My outer casing is 
>pretty banged up and I'd really like to rack mount the SDSV.  Does anyone have 
>any suggestions on where to get a rack kit for the SDSV?  Was there one made by 
>Simmons?  Does anyone have a kit that they'd sell me?  Please let me know
>


 

[Non-text portions of this message have been removed]