The feed from all four voices to the mix out is at the very bottom of the pcb. Each channel al fed there through the "ugly big cap". One cap had come loose and there were more than one break in the line itself. No wonder it didn't work! A couple of fly-wires later it's up and running as expected. Now the task of replacing 50 nuts and 4 screws remain... :S -- electronically yours, jesper - -- --- ---- ----- ---- --- -- - www.electronic-obsession.se
Message
Final (?) update: Re: [Simmons Drums] SDS-III separate outs vs. mix out
2011-03-28 by jesper