Vintage Simmons Drums (UK) Users Group

jimstew37 skrev:
> http://simmonsmuseum.com/?area=downloads&download_id=235 
> <http://simmonsmuseum.com/?area=downloads&download_id=235>
> 
> The power supply is shown on page 5 of this manual.
> 
> Something I forgot to mention earlier is that where the power cord
> plugs in on my SDS-V, it reads "Power Input 240v, " not 115v that I
> would expect if this one was for the US market. That's why I thought
> this might still be set up for European current.

FWIW: I used to own a US made spring reverb that was designed for 110 
volts but some bozo had just switched the plug for a european one and it 
still kept going. It wasn't rewired inside but seemed to cook the 
components beyond their limits so I chose to run it through a step-down 
converter.

> If anyone here has actually opened up their SDS-V, it would be useful
> to compare notes on how things are wired up. My particular unit has
> been set up as a rack mount, and doesn't have the black case, just the
> chassis, so it's easier to get into.

WT has changed from 110 to 220 in a few. Let's see what he has to say. I 
have removed the black plates on mine too to rack fit it so if you don't 
get any luck from other members, drop me a line...

-- 
electronically yours, jesper
- -- --- ---- ----- ---- --- -- -
www.electronic-obsession.se
www.myspace.com/machinepop
- -- --- ---- ----- ---- --- -- -

FRA – arkivera under ”synnerligen misstänkt”