Vintage Simmons Drums (UK) Users Group

I?ve done it on a couple ( or was it three ? ) SDS-7?s  and 3 SDS-V?s. If I 
recall correctly, the SDS-7?s had separate windings for 117 and  230V.

On the SDS-v?s I bought new transformers.

Check the schematics.

WT

----- Original Message ----- 
From: "Berk Aarts" <B.E.R.K@...>
To: <Simmons_Drums@yahoogroups.com>
Sent: Sunday, February 24, 2008 10:37 PM
Subject: Betr: [Simmons Drums] Simmons SDS7 internal tap voltage


> If you know how much the secondary output off the transformer is, it's 
> quit
> easy. replace teh original (110V) to a 230V with the same secondary output
> ( V+ A). Perhaps check your local electronic store, they should know how
> to.
>
> good luck
>
> Berk
>
>
>>-- Oorspronkelijk bericht --
>>To: Simmons_Drums@yahoogroups.com
>>From: "clansmanner" <clansmanner@...>
>>Date: Sun, 24 Feb 2008 21:32:50 -0000
>>Subject: [Simmons Drums] Simmons SDS7 internal tap voltage
>>Reply-To: Simmons_Drums@yahoogroups.com
>>
>>
>>Hello there people, would anyone out there be able to tell me how to 
>>change
>>an American
>>115V SDS7 to UK voltage. Can this be done simply or is it complicated?
>>
>>Thanks
>>
>>Joe
>>
>
>
> ________________________________________________________________________________________
> 12move ADSL: Voordelig, snel en onbeperkt internet.
> Meer informatie vind je op http://adsl.12move.nl
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>