Hi! The SDS-V _DO_ use xlr, but I own a soldering iron and can make cables... =) What I mean is that even with my tele-to-xlr cables I haven't had any trouble with triggering. With my homebuilt contact splitters and cables resulting in many split point and almost 15 meters of cables I get troubles however... But that's a different story though! jesper On Tue, 06 May 2003 07:14 , Vince LeGrand <vlegrand@...> sent: >Oops...Obviously, I don't own an SDSV :-( ....I thought they used XLR connections. > >I do own an SDS8 and SDS7....I'll try to find the time to try connecting the SDS8 pads to the SDS7 and see what the response is like. > > ----- Original Message ----- > X-UIDL: 1052219554805 >From: Jesper > To: Simmons_Drums@yahoogroups.com > Sent: Tuesday, May 06, 2003 2:06 AM > Subject: Re: [Simmons Drums] SDS8 Pads > > > vince: > > Back when the MTM was introduced, I was at a Simmons clinic (hosted by > Reek Havoc who was a Simmons rep at the time), and in talking to him, I have > this fuzzy memory of him saying that the SDS8 pads put out a much lower > signal than other pads (SDSV, SDS7). I think there is a resistor along with > the transducer and you can cut the resistor out of the signal path and get a > hotter signal. This was one reason why the SDS8 pads used 1/4" phone plugs > instead of XLR's (cost obviously being another big reason). You wouldn't > inadvertently hook up SDS8 pads to an SDSV or SDS7. > > But me then, beeating the hell out of my 1/4" out-pads connected to my > SDS-V? Pure luck? Let me know if memory becomes clearer or someone finds > that resistor inside... > > > I've never checked this, but you might check the Alesis manual for what > kind of trigger voltage it is looking for and then hook up a voltmeter to a > pad and see what kind of voltage it generates. > > Good idea, my hexabass has xlr... =) > > > electronically yours, jesper > > http://www.bolina.hsb.se/hsidor/jesper > - -- --- ---- ----- ------ ----- ---- --- -- - > Electronic Obsession Mailorder > http://obsession.svart.nu > > > > Yahoo! Groups Sponsor > > > > > To unsubscribe from this group, send an email to: > Simmons_Drums-unsubscribe@yahoogroups.com > > > > Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. > > > > > >[Non-text portions of this message have been removed] > > > >To unsubscribe from this group, send an email to: >Simmons_Drums-unsubscribe@yahoogroups.com > > > >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ > > >
Message
Re: [Simmons Drums] SDS8 Pads
2003-05-06 by jesper@bolina.hsb.se
Attachments
- No local attachments were found for this message.