Vintage Simmons Drums (UK) Users Group

Ok I will try this, hopefully I can open the pads without damaging 
them. 
--- In Simmons_Drums@yahoogroups.com, <michael.buchner@d...> wrote:
>
> Hey back,
> some simmons pads contain a resistor, hooked up between life and 
ground to
> reduce output voltage (suitable for SDS 5 and SDS 7, f.e.). It is 
soldered
> to the two terminals of the output. To remove it, you have to open 
the pads
> and just cut it off. Then the pads will work with all brains. Have 
Fun.
> Michael
>