SergeModular

> Hello again,
>
> For all of the advice received in response to my prior posting, I am
> most grateful.
>
> From these replies, I have tentatively decided upon the following
> arrangement:
>
> Wilson Analog Dealy (WAD)
> Frequency Shifter (FRS)
> Dual Transient Generator (DTG)
> - with 'Signal In' mod.
> Resonant Equalizer (EQ)
> Wave Multipliers (VCM)
> Dual Channel Stereo Mixer (DCSM)
> Active Processor (ACPR)
> Adapters (ADP)
>
> I had initially hoped to include the Dual Universal Slope Generator
> (DSG) in lieu of the DTG, but the FRS is a three space module instead
> of two (as I had initially thought it to be). The only option here
> would be to see if the ADP could be squeaked into the 'blank' panel
> space on the FRS - not likely however.
>
> Once more, my primary intent here is to create a panel for processing
> external audio.
>
> I welcome any final opinions regrding this configuration.
>
> Best wishes -
>
> Trevor

> Hi,
>
> I agree with Chris here, drop the ADP and use the real estate to expand
> the DTG into a DSG.
>
> Even if you can't squeek some jacks onto the blank portion of the FSR,
> you can alway make a little box that has mini jacks, 1/4" phone jacks,
> and banana jacks for use in physical "protocol" conversion (don't forget
> to put an extra banana jack on your little box for signal ground). Note that
> Paul Schriber makes just such a little panel (if you don't feel like making one
> on you own) that can probably be mounted in a utility box.
>
>
> --- In SergeModular@yahoogroups.com, "circlesround" <birdfrozentoabranch@h...>
> wrote:
>
>>Hello again,
>>
>>For all of the advice received in response to my prior posting, I am
>>most grateful.
>>
>>From these replies, I have tentatively decided upon the following
>>arrangement:
>>
>>Wilson Analog Dealy (WAD)
>>Frequency Shifter (FRS)
>>Dual Transient Generator (DTG)
>>- with 'Signal In' mod.
>>Resonant Equalizer (EQ)
>>Wave Multipliers (VCM)
>>Dual Channel Stereo Mixer (DCSM)
>>Active Processor (ACPR)
>>Adapters (ADP)
>>
>>I had initially hoped to include the Dual Universal Slope Generator
>>(DSG) in lieu of the DTG, but the FRS is a three space module instead
>>of two (as I had initially thought it to be). The only option here
>>would be to see if the ADP could be squeaked into the 'blank' panel
>>space on the FRS - not likely however.
>>
>>Once more, my primary intent here is to create a panel for processing
>>external audio.
>>
>>I welcome any final opinions regrding this configuration.
>>
>>Best wishes -
>>
>>Trevor
>
>
>
>
> To unsubscribe from this group, send an email to:
> SergeModular-unsubscribe@yahoogroups.com
>
> Keep on Patchin'!
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

>>I had initially hoped to include the Dual Universal Slope Generator
>>(DSG) in lieu of the DTG, but the FRS is a three space module instead
>>of two (as I had initially thought it to be). The only option here
>>would be to see if the ADP could be squeaked into the 'blank' panel
>>space on the FRS - not likely however.
>
>
> Considering that the difference between the DSG and DTG is only an issue of
> panel space (same PCB), if you put it next to the FS, you may well be able
> to get it to fit using the FS waste panel strip.
>
> Ken
> _______________________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>
>
>
> To unsubscribe from this group, send an email to:
> SergeModular-unsubscribe@yahoogroups.com
>
> Keep on Patchin'!
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>