SergeModular

I had spoken about this with both Serge and Rex. Serge was willing to go
to the extra work of getting a module that had one less space
requirement for the PCB (the DSG was one of them), but he said it was
really a problem for construction and service, since the FRS board would
cover the panel of the other module. Rex said "no way". Your choices are
pretty much an adaptor or a control module.

Scott
-------------------------------------------
sasami@... wrote:

>>I had initially hoped to include the Dual Universal Slope Generator
>>(DSG) in lieu of the DTG, but the FRS is a three space module instead
>>of two (as I had initially thought it to be). The only option here
>>would be to see if the ADP could be squeaked into the 'blank' panel
>>space on the FRS - not likely however.
>
>
> Considering that the difference between the DSG and DTG is only an issue of
> panel space (same PCB), if you put it next to the FS, you may well be able
> to get it to fit using the FS waste panel strip.
>
> Ken
> _______________________________________________________________________
> Ken Stone sasami@...
> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>
>
>
> To unsubscribe from this group, send an email to:
> SergeModular-unsubscribe@yahoogroups.com
>
> Keep on Patchin'!
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>