Hey Roel -
nice to have another european on the list !
re your ?s bout the DTG as an envelope generator -
It works very well as an AR
stick a trigger into the "trig in"
the "gate" is an output - it outputs a gate level when the AR event is
finished
If you want an ASR connect a gate ( or any other positive voltage that
you want the DTG to track ) to the "signal in"
You should go to James "carbon111" Maier's webpage and download the
copy of "The Gold Book"
that he hosts - the section on how to get envelopes from a DSG applies
to the DTG
http://www.carbon111.com/serge.html
all the best, - Kim in Copenhagen
nice to have another european on the list !
re your ?s bout the DTG as an envelope generator -
It works very well as an AR
stick a trigger into the "trig in"
the "gate" is an output - it outputs a gate level when the AR event is
finished
If you want an ASR connect a gate ( or any other positive voltage that
you want the DTG to track ) to the "signal in"
You should go to James "carbon111" Maier's webpage and download the
copy of "The Gold Book"
that he hosts - the section on how to get envelopes from a DSG applies
to the DTG
http://www.carbon111.com/serge.html
all the best, - Kim in Copenhagen
On Aug 5, 2009, at 10:36 AM, roelelec wrote:
> Hi all,
>
> Last evening I had a big breakthrough with the SSG.
> I thought I had read and studied all the tips and tricks on Egres,
> but I had forgotten about SSG Hijinx part 1-3 from John P., probably
> cause it's almost tucked away under the group module listing. I didn't
> read it before, before I actually had the Serge that is, cause I
> wouldn't understand it anyway, so I thought back then. I had forgotten
> about this section. The clear writing of John P's way to patch-program
> the SSG, did the trick for me. Thanks John!
>
> I succesfully patched from the smooth section a staircase generator,
> a triangle lfo, a square lfo and a non-linear filter.
> I also tried to patch the linear glide, but that didn't work out,
> cause I didn't manage to get a proper trigger for this purpose.
>
> I tried to patch a EG from a TGO and DTG before, but no luck. It must
> be quite simple, but I don't seem to get it right. So my question is
> how to patch a ASR and AR out of TGO and DTG?
> I used the gate and also the signal in, but still couldn't get it.
>
> Something else, related to this. I'm low on cv source. I don't have a
> TKB, don't have a sequencer, so momentarily rely on any EG I patch
> from a DTG and/ or TGO. My question is: Do I need the extended ADSR's
> or are the enveloppes I can patch from a DSG (this M-panel will be
> next on order) sufficient enough? I mean to make automatic melodies
> and such rhythms without a sequencer? Last evening I also combined the
> smooth and stepped section with the cupl and I was amazed about the
> jumping melody I got!
>
> Thanks for help in advance.
>
> Cheers,
>
> Roel
>
>