SergeModular

Last question for at least 48 hours I swear....
I'm away from my Serge for the rest of the night so I have to wait until the morning to work on the 64 step sequence.
I'm assuming you're talking about the combined ABCD. Where should I patch this & are the separate A,B,C,D still functional here? I'm guessing that the 64 step patch runs through A then B then C then D.

Thanks!

--- In SergeModular@yahoogroups.com, matthew carpenter <matfhew.carpenfer@...> wrote:
>
> To limit the number of steps, patch the clock (a square wave or pulse) to
> the CLOCK input, patch the stage gate output (the row of red jacks above row
> A) for one more than the desired length of the sequence to the RESET input.
> To expand the length to 64 steps, patch the clock to the CLOCK input and
> step 16 gate output to the VERT CLOCK input and take the output from ABCD.
> Have fun!
> Matt
> On Sun, Aug 30, 2009 at 3:44 PM, dr.jasoncrest <dr.jasoncrest@...>wrote:
>
> >
> >
> > Thanks Matt,
> > I've got a PDF of the Gold book already and I was able to find some general
> > info on the TKB in there but nothing super specific. I've been meaning to go
> > through some of those learning patches but they don't totally apply to my
> > system.
> > What about limiting the duration of the sequence to under 16 and expanding
> > the sequence up to 64?
> >
> > Very Best,
> > Jason
> >
> >
> > --- In SergeModular@yahoogroups.com <SergeModular%40yahoogroups.com>,
> > matthew carpenter <matfhew.carpenfer@> wrote:
> > >
> > > Hi,
> > >
> > > Welcome to the list and congratulations on Serge ownership.
> > >
> > > The TKB likes to see square waves at it's clock inputs, such as the red
> > > output of a VC Clock, TGO, TGC, DTG or DSG, among many others, in cycle
> > mode
> > > (either via switch or a shorty cable bridging the Trig In and Gate Out).
> > > The Serge Gold Book is one of the best resources for learning about these
> > > things including TKB operation. Scroll down on this page and download the
> > > .zip of the book.
> > >
> > > http://www.carbon111.com/serge.html
> > >
> > > Always feel free to ask any questions you might have.
> > > Matt
> > >
> > > On Sun, Aug 30, 2009 at 11:11 AM, dr.jasoncrest <dr.jasoncrest@
> > ...>wrote:
> > >
> > > >
> > > >
> > > > Greetings,
> > > > I appreciate the opportunity that this forum provides and hopefully at
> > some
> > > > point I can contribute with answers. However, all I have at the moment
> > are
> > > > questions and I'm grateful in advance for your help.
> > > > Currently I'm a bit overwhelmed by my new Serge though slowly/surely
> > > > working my way through (and around) it. I recently started using the
> > TKB and
> > > > have had some issues clocking it properly. I've been using a triangle
> > wave
> > > > as well as a DTG & SSG. I haven't been able to get the TKB sequencer to
> > run
> > > > straight through from 1 to 16. Currently it's firing at random. What
> > should
> > > > I use to clock it so that it will run sequentially through the 16
> > steps?
> > > > Is there anything resembling a manual for the TKB?
> > > >
> > > > Thanks!
> > > > Jason
> > > >
> > > >
> > > >
> > >
> >
> >
> >
>