PLAN B analog blog

On Thu, 2006-11-16 at 02:38 +0000, amthewalrus wrote:
> John,
> 
> All Plan B modules are labeled for correct connection.  The flat power cables included with 
> your modules have a red stripe on one side.  All Plan B modules are labeled "Red Band This 
> End" on one side of the board.  Line up the labeling on the board and the red stripe on the 
> cable and plug them in.  Just that easy.

iirc the boards have all of the connections labeled (and so are my
doepfer power supplies). so i just checked my cable to make sure both
ends matched. i feel like i read somewhere that a run of planb modules
came out with the red stripe on the wrong side, so i double checked this
when i installed everything.

-jon