finally got my gated comparator panel
2007-10-05 by loopcycle
...and im 95% happy with it (enough to upload a couple pictures to the group). I took the FPE design here in the Files section, but had to makea handful of changes since I built the cgs13 up from an Elby kit using very large leds. BTW, the sliding caliper measurement tool was possibly the best $6 I've spent. It gave me all the measurements I needed to modify the FP design. From now on I will be ordering all my parts and measuring them before I order a frontpanel. I went with a 3mm thickness = perfect for motm. I also used the 0.2mm engraving tool and the text looks perfect--see the photo. I will use the 0.2mm from now on.