Modular Synth Panels

hello,

the metal is at the painters/ silkscreeners and will be done within a
week.
anyone who wants a Neural Agonizer panel can order now.
they are only $20, because, to make a long story short, i suck.
they are only .090" thick instead of .125".
i made a choice for thinner panels instead of much more expensive
panels that would take another 3 weeks.
i still will lose money, because i have 20 NA panels, .125" thick,
where 4 jack holes are a whole inch off their grid, in a completely
useless position.
so, i'm supremely mad at myself, and some of you are probably fairly
annoyed. sorry.
after the two coats of paint, the disparity between .090" and .125"
isn't horrible, but it's there.
the panels won't flex or anything like that.
i'm not feeling especially smart or capable right now, but i hope this
works for those who are waiting, and i apologize.

thanks,
Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com

I didn't mean to whine; I was very angry at myself!
But I'm all better now :)

I knew there were a lot of PCBs/ possible modules out there, but it
seems I hear of five new ones every day! Oy vey!

Cheers,
Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com

On Jul 31, 2007, at 7:20 AM, Todd Fletcher wrote:

> I'm sure if you put a washer between the panel and the rails nobody
> would ever know.
>  
> cheer up scott, and make a Thomas Henry SN Voice Panel!
>  
> Thanks,
> Todd
>
>
>