Modular Synth Panels

hey guys,

new panels and brackets and mounting rails are available! the site
should be updated soon. the panels are:
cgs: digital noise, slope detector, seq switch (i call it event seq/
wavetracker; it uses an additional glide pcb available soon, or use
tellun's muub-2)
mfos: s&h, vco
tellun: gate, lag, switch
oakley: vco, multimix, vcadsr, sample&slew
metasonix tm-1m
multiples :)

some designs are missing (a few casualties along the path from me to
metal fabs to silkscreeners... :( ) and more are coming, but not for a
little while, as this run was expensive! the faster they sell, the
faster new designs will arrive -- wink wink, nudge nudge...

nano-glide pcb on the way, too -- two glides on a 1.5"x1" PCB w/ one
pot board-mounted!

cheers,
Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com

You'd sell them faster if they were on the website -
*wink*wink*nudge*nudge*

So, can you tell us about them? Are the Tellun panels in standard MOTM
or the semi-MOTM Tellun layout? Which Multimix did you do, the stooge
one or one of the other layouts.

Thanks,
Mike

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> hey guys,
>
> new panels and brackets and mounting rails are available! the site
> should be updated soon. the panels are:
> cgs: digital noise, slope detector, seq switch (i call it event seq/
> wavetracker; it uses an additional glide pcb available soon, or use
> tellun's muub-2)
> mfos: s&h, vco
> tellun: gate, lag, switch
> oakley: vco, multimix, vcadsr, sample&slew
> metasonix tm-1m
> multiples :)
>
> some designs are missing (a few casualties along the path from me to
> metal fabs to silkscreeners... :( ) and more are coming, but not for a
> little while, as this run was expensive! the faster they sell, the
> faster new designs will arrive -- wink wink, nudge nudge...
>
> nano-glide pcb on the way, too -- two glides on a 1.5"x1" PCB w/ one
> pot board-mounted!
>
> cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> www.bridechamber.com
>

----- Original Message -----

From: clickmrmike

To: ModularSynthPanels@yahoogroups.com

Sent: Monday, April 02, 2007 10:10 AM

Subject: [ModularSynthPanels] Re: panels and brackets available

You'd sell them faster if they were on the website -
*wink*wink*nudge* nudge*

So, can you tell us about them? Are the Tellun panels in standard MOTM
or the semi-MOTM Tellun layout? Which Multimix did you do, the stooge
one or one of the other layouts.

Thanks,
Mike

--- In ModularSynthPanels@ yahoogroups. com, Scott Deyo <contact@... > wrote:
>
> hey guys,
>
> new panels and brackets and mounting rails are available! the site
> should be updated soon. the panels are:
> cgs: digital noise, slope detector, seq switch (i call it event seq/
> wavetracker; it uses an additional glide pcb available soon, or use
> tellun's muub-2)
> mfos: s&h, vco
> tellun: gate, lag, switch
> oakley: vco, multimix, vcadsr, sample&slew
> metasonix tm-1m
> multiples :)
>
> some designs are missing (a few casualties along the path from me to
> metal fabs to silkscreeners. .. :( ) and more are coming, but not for a
> little while, as this run was expensive! the faster they sell, the
> faster new designs will arrive -- wink wink, nudge nudge...
>
> nano-glide pcb on the way, too -- two glides on a 1.5"x1" PCB w/ one
> pot board-mounted!
>
> cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> www.bridechamber. com
>

Waiting for the update on the bridechamber site...and the site is looking a bit
broken right now.

* The requested URL /news 2.html was not found on this server. *





--- contact@... wrote:

> yeah, my web guy must be busy... soon, i hope...
>
> tellun are "telllun small pot" layout, pretty much like on the tellun site.
> the multimix is, i believe, number 3: it is three reversible attenuators
> normalized to the third out, labeled "OUT 3/ MIX".
>
> graphics are consistent w/ other modules on my site.
>
> prices are the same as before, $20 for 1U +$5 per unit of width after that.
> worldwide shipping prices are on the site. they are ROHS.
>
> cheers,
> scott
>
> ----- Original Message -----
> From: clickmrmike
> To: ModularSynthPanels@yahoogroups.com
> Sent: Monday, April 02, 2007 10:10 AM
> Subject: [ModularSynthPanels] Re: panels and brackets available
>
>
> You'd sell them faster if they were on the website -
> *wink*wink*nudge*nudge*
>
> So, can you tell us about them? Are the Tellun panels in standard MOTM
> or the semi-MOTM Tellun layout? Which Multimix did you do, the stooge
> one or one of the other layouts.
>
> Thanks,
> Mike
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
> >
> > hey guys,
> >
> > new panels and brackets and mounting rails are available! the site
> > should be updated soon. the panels are:
> > cgs: digital noise, slope detector, seq switch (i call it event seq/
> > wavetracker; it uses an additional glide pcb available soon, or use
> > tellun's muub-2)
> > mfos: s&h, vco
> > tellun: gate, lag, switch
> > oakley: vco, multimix, vcadsr, sample&slew
> > metasonix tm-1m
> > multiples :)
> >
> > some designs are missing (a few casualties along the path from me to
> > metal fabs to silkscreeners... :( ) and more are coming, but not for a
> > little while, as this run was expensive! the faster they sell, the
> > faster new designs will arrive -- wink wink, nudge nudge...
> >
> > nano-glide pcb on the way, too -- two glides on a 1.5"x1" PCB w/ one
> > pot board-mounted!
> >
> > cheers,
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > www.bridechamber.com
> >
>
>
>
>

____________________________________________________________________________________
TV dinner still cooling?
Check out "Tonight's Picks" on Yahoo! TV.
http://tv.yahoo.com/

it should be up soon. i really hope it is up soon....

Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com

On Apr 6, 2007, at 4:06 PM, angelzero wrote:

> Waiting for the update on the bridechamber site...and the site is
> looking a bit
> broken right now.
>
> * The requested URL /news 2.html was not found on this server. *
>
> --- contact@... wrote:
>
> > yeah, my web guy must be busy... soon, i hope...
> >
> > tellun are "telllun small pot" layout, pretty much like on the
> tellun site.
> > the multimix is, i believe, number 3: it is three reversible
> attenuators
> > normalized to the third out, labeled "OUT 3/ MIX".
> >
> > graphics are consistent w/ other modules on my site.
> >
> > prices are the same as before, $20 for 1U +$5 per unit of width
> after that.
> > worldwide shipping prices are on the site. they are ROHS.
> >
> > cheers,
> > scott
> >
> > ----- Original Message -----
> > From: clickmrmike
> > To: ModularSynthPanels@yahoogroups.com
> > Sent: Monday, April 02, 2007 10:10 AM
> > Subject: [ModularSynthPanels] Re: panels and brackets available
> >
> >
> > You'd sell them faster if they were on the website -
> > *wink*wink*nudge*nudge*
> >
> > So, can you tell us about them? Are the Tellun panels in standard
> MOTM
> > or the semi-MOTM Tellun layout? Which Multimix did you do, the
> stooge
> > one or one of the other layouts.
> >
> > Thanks,
> > Mike
> >
> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
> wrote:
> > >
> > > hey guys,
> > >
> > > new panels and brackets and mounting rails are available! the site
> > > should be updated soon. the panels are:
> > > cgs: digital noise, slope detector, seq switch (i call it event
> seq/
> > > wavetracker; it uses an additional glide pcb available soon, or
> use
> > > tellun's muub-2)
> > > mfos: s&h, vco
> > > tellun: gate, lag, switch
> > > oakley: vco, multimix, vcadsr, sample&slew
> > > metasonix tm-1m
> > > multiples :)
> > >
> > > some designs are missing (a few casualties along the path from me
> to
> > > metal fabs to silkscreeners... :( ) and more are coming, but not
> for a
> > > little while, as this run was expensive! the faster they sell, the
> > > faster new designs will arrive -- wink wink, nudge nudge...
> > >
> > > nano-glide pcb on the way, too -- two glides on a 1.5"x1" PCB w/
> one
> > > pot board-mounted!
> > >
> > > cheers,
> > > Scott Deyo
> > > The Bridechamber
> > > contact@...
> > > www.bridechamber.com
> > >
> >
> >
> >
> >
>
> __________________________________________________________
> TV dinner still cooling?
> Check out "Tonight's Picks" on Yahoo! TV.
> http://tv.yahoo.com/
>
>