Modular Synth Panels

hiya group!

i have 16 designs at the painters/ silkscreeners, and they SAY it 
should all be done next week. we'll see about that. but anyway, it 
should be very soon. it's all MOTM format this time; DotCom will start 
on the next run.

i sourced a local acrylic panel guy to protect us whilst gazing at our 
tubes in the Metasonix TM-1M. those will be available (assembled only, 
sorry) as soon as i get the boards from Eric.

did i mention cabinets are ready to be made? i have the protos, w/ 
(admittedly poor) photos on the site. mounting rails will be done w/ 
the panels. the carpenter is a professional; these things are solid! 
(the one i made for a show once was held together by the modules, 
pretty much, so it's a good thing i didn't try to tackle those ;)

i have three new brackets: MFOS (3 pot, various holes, will have to 
drill 4th corner's hole if you're retentive), 3-jack vertical (w/ 
larger middle hole for pushbutton (think Tellun), CGS- and some 
Tellun-spaced holes), and Metasonix (purchasable w/ panel for putting 
your yellow TM-1M behind a 2U black MOTM-format panel.

mixed news on the Neural Agonizer: somewhere between me, my metal guys, 
and my fax machine, the Neural Agonizer design was lost. bad news for 
me who wanted to finally finish my NA! :)  good news: Doug Wellington 
is making the NA anyways, so that's good. sorry to everyone who was 
waiting along w/ me, but... Doug will save us :)

i've contracted out PCB population/soldering to a professional friend. 
this will make life much easier on the assembled module tip and free up 
some time for designing new panels and PCBs! wheeee!

happy patching!
peace,
Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com