Modular Synth Panels group photo

Yahoo Groups archive

Modular Synth Panels

Index last updated: 2026-03-30 17:30 UTC

Thread

[ModularSynthPanels] Update...

Re: [ModularSynthPanels] Update...

2007-02-04 by contact@bridechamber.com

heya folks!
metal guys are still workin' it. brackets, cabinets and more soon! cabinets are actually waiting for the brackets!
2 and a half "nano" PCBs laid out -- LFO, dual Glide, and noise variable from white to sub-pink. these boards are meant for modules and/or retrofitting, and have PCB-mounted pots. they are good practice for "real" designs i'm still prototyping.
here's the official metal fab list: (m = mfos, o = oakley, c = cgs, t = tellun)
m adsr
o adsr
t switch
t lag
t gate
c digital noise
m vco
o vco
metasonix tm-1m (need still to visit some acrylic cover folks for the tube cutout...)
c seq switch (i renamed it 'event sequencer' and added my glide, at audio and cv rates)
c slope generator
o vclfo
o s&h
m s&h
o multimix a
multiples
o vcadsr
after that, smaller runs, and including dotcom format.
bridechamber modules may eventually be available in blacet and such, but that's on "the long list". too many patient dotcom customers... :)
anyway, i'll keep you posted, but i don't want to talk too much before things are "in production". current kit customers have been very patient! bi'n'tic plans are on the site now, including mods! the VC Resistor schems and such are also on the site. i fully support DIY, since i owe everything to that movement. if something's not on the site and you're wondering, drop me a line. no secrets, just not enough time...
cheers,
scott
----- Original Message -----
Sent: Friday, February 02, 2007 6:19 PM
Subject: [ModularSynthPanels] Update...

Rabble rabble rabble rabble

Any updates?

Rabble rabble rabble rabble

Food fight? Enjoy some healthy debate
in the Yahoo! Answers Food Drink Q&A.

Re: [ModularSynthPanels] Update...

2007-02-04 by James Elliott

I thought you mentioned in the past (several times) that the neural agonizer panel was going to be in included in the first run.

Is that not the case?

-Jim

----- Original Message ----
From: "contact@..." <contact@...>
To: ModularSynthPanels@yahoogroups.com
Sent: Saturday, February 3, 2007 9:25:10 PM
Subject: Re: [ModularSynthPanels] Update...

heya folks!
metal guys are still workin' it. brackets, cabinets and more soon! cabinets are actually waiting for the brackets!
2 and a half "nano" PCBs laid out -- LFO, dual Glide, and noise variable from white to sub-pink. these boards are meant for modules and/or retrofitting, and have PCB-mounted pots. they are good practice for "real" designs i'm still prototyping.
here's the official metal fab list: (m = mfos, o = oakley, c = cgs, t = tellun)
m adsr
o adsr
t switch
t lag
t gate
c digital noise
m vco
o vco
metasonix tm-1m (need still to visit some acrylic cover folks for the tube cutout...)
c seq switch (i renamed it 'event sequencer' and added my glide, at audio and cv rates)
c slope generator
o vclfo
o s&h
m s&h
o multimix a
multiples
o vcadsr
after that, smaller runs, and including dotcom format.
bridechamber modules may eventually be available in blacet and such, but that's on "the long list". too many patient dotcom customers... :)
anyway, i'll keep you posted, but i don't want to talk too much before things are "in production". current kit customers have been very patient! bi'n'tic plans are on the site now, including mods! the VC Resistor schems and such are also on the site. i fully support DIY, since i owe everything to that movement. if something's not on the site and you're wondering, drop me a line. no secrets, just not enough time...
cheers,
scott
----- Original Message -----
Sent: Friday, February 02, 2007 6:19 PM
Subject: [ModularSynthPanels ] Update...

Rabble rabble rabble rabble

Any updates?

Rabble rabble rabble rabble

Food fight? Enjoy some healthy debate
in the Yahoo! Answers Food Drink Q&A.



Don't be flakey. Get Yahoo! Mail for Mobile and
always stay connected to friends.

Re: [ModularSynthPanels] Update...

2007-02-04 by contact@bridechamber.com

You're right. The 3U designs were missing from the list. They are the Neural Ag and... where'd they go? I think it was the Bandpass Filterbank (6 CGS Bandpass w/ level for each, in 'tellun small pot spacing').
So I guess my "official" list was not officially official :)
Mounting rails are in that run, of course, as well as "Vertical Jack Brackets" and "MFOS Brackets".
Cheers,
Scott
----- Original Message -----
Sent: Saturday, February 03, 2007 11:34 PM
Subject: Re: [ModularSynthPanels] Update...

I thought you mentioned in the past (several times) that the neural agonizer panel was going to be in included in the first run.

Is that not the case?

-Jim

----- Original Message ----
From: "contact@bridechamb er.com" <contact@bridechambe r.com>
To: ModularSynthPanels@ yahoogroups. com
Sent: Saturday, February 3, 2007 9:25:10 PM
Subject: Re: [ModularSynthPanels ] Update...

heya folks!
metal guys are still workin' it. brackets, cabinets and more soon! cabinets are actually waiting for the brackets!
2 and a half "nano" PCBs laid out -- LFO, dual Glide, and noise variable from white to sub-pink. these boards are meant for modules and/or retrofitting, and have PCB-mounted pots. they are good practice for "real" designs i'm still prototyping.
here's the official metal fab list: (m = mfos, o = oakley, c = cgs, t = tellun)
m adsr
o adsr
t switch
t lag
t gate
c digital noise
m vco
o vco
metasonix tm-1m (need still to visit some acrylic cover folks for the tube cutout...)
c seq switch (i renamed it 'event sequencer' and added my glide, at audio and cv rates)
c slope generator
o vclfo
o s&h
m s&h
o multimix a
multiples
o vcadsr
after that, smaller runs, and including dotcom format.
bridechamber modules may eventually be available in blacet and such, but that's on "the long list". too many patient dotcom customers... :)
anyway, i'll keep you posted, but i don't want to talk too much before things are "in production". current kit customers have been very patient! bi'n'tic plans are on the site now, including mods! the VC Resistor schems and such are also on the site. i fully support DIY, since i owe everything to that movement. if something's not on the site and you're wondering, drop me a line. no secrets, just not enough time...
cheers,
scott
----- Original Message -----
Sent: Friday, February 02, 2007 6:19 PM
Subject: [ModularSynthPanels ] Update...

Rabble rabble rabble rabble

Any updates?

Rabble rabble rabble rabble

Food fight? Enjoy some healthy debate
in the Yahoo! Answers Food Drink Q&A.



Don't be flakey. Get Yahoo! Mail for Mobile and
always stay connected to friends.