Modular Synth Panels

I just posted a slightly modified version of Scott's CGS 5U Gate 
Sequencer. Comments?

1. Changed text to .2mm engraving tool
2. Fixed some hole/text alignment errors
3. Changed panel thickness to 3mm (closer to MOTM)
4. LED holes are 4.32mm for VCC 3mm panel mount LED holders
5. Rotary switch to 3/8" for Lorlin 1x12
6. Red finish

That's what this group is all about! Thanks for doing that; I didn't 
even notice the errors! <blush> All those changes sound good. I'll 
take mine down, though I'll still be ordering a batch of 5 green ones 
for myself and another orderer. 

My designs are made for 5mm led's, pcb-mounted w/o holders, or 
epoxied behind the panel in case anyone is wondering what fits my 
5.05mm holes.

Have you seen the green finish, though? It's pretty sexy.... ;)

Scott

--- In motmpanels@y..., "cstella4" <scelectronics@e...> wrote:

> I just posted a slightly modified version of Scott's CGS 5U Gate 
> Sequencer. Comments?
> 
> 1. Changed text to .2mm engraving tool
> 2. Fixed some hole/text alignment errors
> 3. Changed panel thickness to 3mm (closer to MOTM)
> 4. LED holes are 4.32mm for VCC 3mm panel mount LED holders
> 5. Rotary switch to 3/8" for Lorlin 1x12
> 6. Red finish