Blacet Format Panels
2004-06-22 by Mike Marsh
Hello All -
I'm gradually building up my Blacet format modular. This
compliments my already pretty large MOTM format modular. The thing
I miss most about the MOTM when I'm Blacet-ing is the myriad of
inputs mixers mults that I have available. Rather than use a bunch
of converter cables and 940 panel space, I've designed these two
panels for the Blacet: a CGS DC Mixer and a mult.
The mixer uses 5 of the available 6 inputs due to space
considerations. I wanted to keep the grid format the same as the
Blacet modules. 5 is good enough! The mult imitates the MOTM
version with one less set.
Please note that I don't have these panels back from Schaeffer yet,
so I can't vouch for accuarcy. But I used John's template and was
pretty careful. I think they are a go.
Mike
I'm gradually building up my Blacet format modular. This
compliments my already pretty large MOTM format modular. The thing
I miss most about the MOTM when I'm Blacet-ing is the myriad of
inputs mixers mults that I have available. Rather than use a bunch
of converter cables and 940 panel space, I've designed these two
panels for the Blacet: a CGS DC Mixer and a mult.
The mixer uses 5 of the available 6 inputs due to space
considerations. I wanted to keep the grid format the same as the
Blacet modules. 5 is good enough! The mult imitates the MOTM
version with one less set.
Please note that I don't have these panels back from Schaeffer yet,
so I can't vouch for accuarcy. But I used John's template and was
pretty careful. I think they are a go.
Mike