Modular Synth Panels

Anyone have any panel designs for the Curetronic 100m stuff. Specifically the VCF, VCA, and S&H / noise / ring mod. MU or MOTM format.

Rico

I've got a basic panel that I had designed for the Curetronic 121 VCF that I'd already posted on the MW forums, so it's about time that I posted it on here as well.

I've added a new folder in the Files section for this panel, as well as a basic design I've also done for the Curetronic SX1000 VCF.

I'll be adding some other designs to this in the near future, including some for the Curetronic 150 and 172, as well as the 3799 VCF/VCA/Pan, that I've got PCB's for at the moment.

Regards

Magman

--- In ModularSynthPanels@yahoogroups.com, "Rico" <ricoloverde@...> wrote:
>
> Anyone have any panel designs for the Curetronic 100m stuff. Specifically the VCF, VCA, and S&H / noise / ring mod. MU or MOTM format.
>
> Rico
>

OK, just knocked up a first pass 1U panel for the Curetronic 150 - Ringmod, Noise, Clock and S/H module.

I'm also planning a 2U version, bringing the presets for Noise Level and X+Y Trims out to pots on the front panel, rather than presets on the PCB. Watch this space.

Regards

Magman

--- In ModularSynthPanels@yahoogroups.com, "magman2112" <mikegorman@...> wrote:
>
> I've got a basic panel that I had designed for the Curetronic 121 VCF that I'd already posted on the MW forums, so it's about time that I posted it on here as well.
>
> I've added a new folder in the Files section for this panel, as well as a basic design I've also done for the Curetronic SX1000 VCF.
>
> I'll be adding some other designs to this in the near future, including some for the Curetronic 150 and 172, as well as the 3799 VCF/VCA/Pan, that I've got PCB's for at the moment.
>
> Regards
>
> Magman
>
> --- In ModularSynthPanels@yahoogroups.com, "Rico" <ricoloverde@> wrote:
> >
> > Anyone have any panel designs for the Curetronic 100m stuff. Specifically the VCF, VCA, and S&H / noise / ring mod. MU or MOTM format.
> >
> > Rico
> >
>

Hi !

I did a custom desgin for the 121 vcf and 150 ringmod.

i did the design spacing between knobs and so is as on the original curetronic design.

if you are interested i can send some photos

--
Oliver, DL6KBG, JO61UB
Online-SDR: http://dl6kbg.dyndns.org
Blog: dl6kbg.blogspot.com

Thanks Magman!

On Sunday, February 6, 2011, Oliver Goldenstein
<oliver.goldenstein@...> wrote:

>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Hi !
>
> I did a custom desgin for the 121 vcf and 150 ringmod.
>
> i did the design spacing between knobs and so is as on the original curetronic design.
>
> if you are interested i can send some photos
>
> --
> Oliver, DL6KBG, JO61UB
> Online-SDR: http://dl6kbg.dyndns.org
> Blog: dl6kbg.blogspot.com
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>

--
________________
rico loverde
415.596.6255
ricoloverde.com