Hey Larry,
Thanks much for the photo link. Very tidy wiring. I want a Stooge
panel like yours for my Low Pass Gates, and a 3-pot long Stooge bracket
would work for me too. I have cut several of them to fit my oddball
panel designs.
One question: Cynthia says it is customary to use Amber color LEDs in
the Low Pass Gates. Did you use Amber? If so, what Mouser part
number? Ok, that was a two-part question.
Heh, you think that's a lot of wiring. You should see my latest
FrankenModule in a custom Stooge panel: One MOTM-101 S&H with noise,
plus two Oakley S&H modules, all in the 2U space that the MOTM-101
originally occupied. The Oakley boards stack on top of each other
behind the MOTM board, all on a Stooge 4-pot long bracket. A 1/2" x
3/4" notch had to be cut out of the lower corner of the MOTM board to
allow a jack to fit where the MOTM slew pot used to be. The bracket was
cut out, too. Compared to this the Low Pass Gates looks like a piece
cake! There's an old Chinese proverb that says a synthesizer of a
thousand modules begins by stripping and tinning one wire. (Or
something like that.)
-Richard Brewster
Larry Hendry wrote:
>--- Richard Brewster <pugix@...> wrote:
>
>
>>I am going to build a Cyndustries Buchla Quad Lowpass Gate into
>>MOTM format. Cynthia sells the assembled PC board alone. I see
>>some panels for these in the Josue Arias Designs file folder and
>>I'd like to hear from anyone who has done this. In particular how
>>did you mount the board, hook up power, etc..
>>Thanks,
>>Richard Brewster
>>
>>
>
>Hi Richard, I responded privately to your question about our panel
>availability. But, I thought I would respond publicly to these
>questions of general interest. You have seen our panel design. It
>was done by Todd Faulkner when he rquested 2 of these panels.
>
>http://www.wiseguysynth.com/larry/panel/gif/qlpg.gif
>
>I have indeed built one. The power is easy. It comes with a MOTM
>style 0.156 power connector. Plug and play baby. :)
>
>As you can imagine, I used one of my Stooge mouting brackets with
>some trimming at the front to avoid LED interference. This is my 3
>pot long Stooge bracket (does fit in dot com cases BTW).
>
>Here is the photo of my completed QLPG from the rear. There is a LOT
>of PCB to front panel wiring. A good portion of mine goes under the
>PCB. Sorry for the photo quality, I don't have my regular camera
>right now.
>
>http://www.wiseguysynth.com/larry/misc/qlpg.jpg
>
>Larry Hendry
>
>
>__________________________________
>Do you Yahoo!?
>Free Pop-Up Blocker - Get it now
>http://companion.yahoo.com/
>
>
>
