Modular Synth Panels

http://www.mattsonminimodular.com/

Go to the store and look at the individual modules. Most have an
assembled board available for $75.00. Time to crank up the panel design
software for these! And how about a Bridechamber bracket with holes to
match the MMM boards?

Happy New Year,

Richard
http://pugix.com

What do the PCBs look like? Or did I miss that?

The VC mixer is a steal!  I'll be doing a few of those. 

--- On Sat, 1/2/10, Scott Deyo <contact@...> wrote:

From: Scott Deyo <contact@...>
Subject: Re: [ModularSynthPanels] Mattson Mini Modular assembled boards now available for DIY
To: ModularSynthPanels@yahoogroups.com
Date: Saturday, January 2, 2010, 5:03 PM

 

What do the PCBs look like? Or did I miss that?

For my money, I'd probably still go with MOTM or other (ahem) boards since nothing looked too different except maybe the VC Mixer. 

As a standalone gigging modular it looks like a ton of fun, plus I'd love anything with "Jim Patchell" on it!!!!!!

Scott Deyo

contact@bridechambe r.com

The Bridechamber

www.bridechamber. com

Jealous Edison Record Kompany

www.jealousedison. com

On Jan 2, 2010, at 3:26 PM, Richard Brewster wrote:

http://www.mattsonm inimodular. com/

Go to the store and look at the individual modules. Most have an 
assembled board available for $75.00. Time to crank up the panel design 
software for these! And how about a Bridechamber bracket with holes to 
match the MMM boards?

Happy New Year,

Richard
http://pugix. com

Read this discussion thread on Muff Wiggler:

http://www.muffwiggler.com/forum/viewtopic.php?t=469

There is a photo of the boards included.

Some of the MMM modules are interesting, such as the VCA with two
different modulation inputs. The buffered multiple is a great idea,
too. That one would have a simple panel.

Richard

Scott Deyo wrote:

>
>
> What do the PCBs look like? Or did I miss that?
>
> For my money, I'd probably still go with MOTM or other (ahem) boards
> since nothing looked too different except maybe the VC Mixer.
> As a standalone gigging modular it looks like a ton of fun, plus I'd
> love anything with "Jim Patchell" on it!!!!!!
>
> Scott Deyo
> contact@... <mailto:contact@...>
> The Bridechamber
> www.bridechamber.com <http://www.bridechamber.com>
> Jealous Edison Record Kompany
> www.jealousedison.com <http://www.jealousedison.com>
>
>
>
>
> On Jan 2, 2010, at 3:26 PM, Richard Brewster wrote:
>
>> http://www.mattsonminimodular.com/ <http://www.mattsonminimodular.com/>
>>
>> Go to the store and look at the individual modules. Most have an
>> assembled board available for $75.00. Time to crank up the panel design
>> software for these! And how about a Bridechamber bracket with holes to
>> match the MMM boards?
>>
>> Happy New Year,
>>
>> Richard
>> http://pugix.com <http://pugix.com>
>>
>
>
>
>

I just ran across this link, which has all the details, including photos
of each board in detail.

http://mmm.sevcom.com/wiki/index.php/DIYcisions_DIYcisions

Richard

Richard Brewster wrote:

> Read this discussion thread on Muff Wiggler:
>
> http://www.muffwiggler.com/forum/viewtopic.php?t=469
>
> There is a photo of the boards included.
>
> Some of the MMM modules are interesting, such as the VCA with two
> different modulation inputs. The buffered multiple is a great idea,
> too. That one would have a simple panel.
>
> Richard
>
> Scott Deyo wrote:
>
>> What do the PCBs look like? Or did I miss that?
>>
>> For my money, I'd probably still go with MOTM or other (ahem) boards
>> since nothing looked too different except maybe the VC Mixer.
>> As a standalone gigging modular it looks like a ton of fun, plus I'd
>> love anything with "Jim Patchell" on it!!!!!!
>>
>> Scott Deyo
>> contact@... <mailto:contact@...>
>> The Bridechamber
>> www.bridechamber.com <http://www.bridechamber.com>
>> Jealous Edison Record Kompany
>> www.jealousedison.com <http://www.jealousedison.com>
>>
>>
>>
>>
>> On Jan 2, 2010, at 3:26 PM, Richard Brewster wrote:
>>
>>
>>> http://www.mattsonminimodular.com/ <http://www.mattsonminimodular.com/>
>>>
>>> Go to the store and look at the individual modules. Most have an
>>> assembled board available for $75.00. Time to crank up the panel design
>>> software for these! And how about a Bridechamber bracket with holes to
>>> match the MMM boards?
>>>
>>> Happy New Year,
>>>
>>> Richard
>>> http://pugix.com <http://pugix.com>
>>>
>>>
>>
>>
>>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>

Nice!

I did a layout for the VC Mixer, which I may sneak onto the next run,
which will be another huge one.

Serge VCF and VCS panels should be done this week!

Scott Deyo
contact@...
The Bridechamber
www.bridechamber.com
Jealous Edison Record Kompany
www.jealousedison.com

On Jan 6, 2010, at 8:58 PM, Richard Brewster wrote:

> I just ran across this link, which has all the details, including
> photos
> of each board in detail.
>
> http://mmm.sevcom.com/wiki/index.php/DIYcisions_DIYcisions
>
> Richard
>
> Richard Brewster wrote:
>> Read this discussion thread on Muff Wiggler:
>>
>> http://www.muffwiggler.com/forum/viewtopic.php?t=469
>>
>> There is a photo of the boards included.
>>
>> Some of the MMM modules are interesting, such as the VCA with two
>> different modulation inputs. The buffered multiple is a great idea,
>> too. That one would have a simple panel.
>>
>> Richard
>>
>> Scott Deyo wrote:
>>
>>> What do the PCBs look like? Or did I miss that?
>>>
>>> For my money, I'd probably still go with MOTM or other (ahem) boards
>>> since nothing looked too different except maybe the VC Mixer.
>>> As a standalone gigging modular it looks like a ton of fun, plus I'd
>>> love anything with "Jim Patchell" on it!!!!!!
>>>
>>> Scott Deyo
>>> contact@... <mailto:contact@...>
>>> The Bridechamber
>>> www.bridechamber.com <http://www.bridechamber.com>
>>> Jealous Edison Record Kompany
>>> www.jealousedison.com <http://www.jealousedison.com>
>>>
>>>
>>>
>>>
>>> On Jan 2, 2010, at 3:26 PM, Richard Brewster wrote:
>>>
>>>
>>>> http://www.mattsonminimodular.com/ <http://www.mattsonminimodular.com/
>>>> >
>>>>
>>>> Go to the store and look at the individual modules. Most have an
>>>> assembled board available for $75.00. Time to crank up the panel
>>>> design
>>>> software for these! And how about a Bridechamber bracket with
>>>> holes to
>>>> match the MMM boards?
>>>>
>>>> Happy New Year,
>>>>
>>>> Richard
>>>> http://pugix.com <http://pugix.com>
>>>>
>>>>
>>>
>>>
>>>
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>

The VC Mixer is appealing. I did a 1U FPD panel for it, using the 1"
grid I've been playing around with. I also did the active multiple, to
which I added 4 pots as attenuators on the inputs. That makes it into
four active attenuators.

Regarding the Serge VCS panels.... YABADABADOOOOOO! I already have the
PC boards and all parts waiting for two of those.

Richard

Scott Deyo wrote:

> Nice!
>
> I did a layout for the VC Mixer, which I may sneak onto the next run,
> which will be another huge one.
>
> Serge VCF and VCS panels should be done this week!
>
> Scott Deyo
> contact@...
> The Bridechamber
> www.bridechamber.com
> Jealous Edison Record Kompany
> www.jealousedison.com
>
>
>
>
> On Jan 6, 2010, at 8:58 PM, Richard Brewster wrote:
>
>
>> I just ran across this link, which has all the details, including
>> photos
>> of each board in detail.
>>
>> http://mmm.sevcom.com/wiki/index.php/DIYcisions_DIYcisions
>>
>> Richard
>>
>> Richard Brewster wrote:
>>
>>> Read this discussion thread on Muff Wiggler:
>>>
>>> http://www.muffwiggler.com/forum/viewtopic.php?t=469
>>>
>>> There is a photo of the boards included.
>>>
>>> Some of the MMM modules are interesting, such as the VCA with two
>>> different modulation inputs. The buffered multiple is a great idea,
>>> too. That one would have a simple panel.
>>>
>>> Richard
>>>
>>> Scott Deyo wrote:
>>>
>>>
>>>> What do the PCBs look like? Or did I miss that?
>>>>
>>>> For my money, I'd probably still go with MOTM or other (ahem) boards
>>>> since nothing looked too different except maybe the VC Mixer.
>>>> As a standalone gigging modular it looks like a ton of fun, plus I'd
>>>> love anything with "Jim Patchell" on it!!!!!!
>>>>
>>>> Scott Deyo
>>>> contact@... <mailto:contact@...>
>>>> The Bridechamber
>>>> www.bridechamber.com <http://www.bridechamber.com>
>>>> Jealous Edison Record Kompany
>>>> www.jealousedison.com <http://www.jealousedison.com>
>>>>
>>>>
>>>>
>>>>
>>>> On Jan 2, 2010, at 3:26 PM, Richard Brewster wrote:
>>>>
>>>>
>>>>
>>>>> http://www.mattsonminimodular.com/ <http://www.mattsonminimodular.com/
>>>>>
>>>>> Go to the store and look at the individual modules. Most have an
>>>>> assembled board available for $75.00. Time to crank up the panel
>>>>> design
>>>>> software for these! And how about a Bridechamber bracket with
>>>>> holes to
>>>>> match the MMM boards?
>>>>>
>>>>> Happy New Year,
>>>>>
>>>>> Richard
>>>>> http://pugix.com <http://pugix.com>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>

Whoops, typo. Serge VCF panels are a month out, but CMOS VCF panels
will be done this week.

Scott Deyo
contact@...
The Bridechamber
www.bridechamber.com
Jealous Edison Record Kompany
www.jealousedison.com

On Jan 10, 2010, at 1:30 PM, Scott Deyo wrote:

> Nice!
>
> I did a layout for the VC Mixer, which I may sneak onto the next
> run, which will be another huge one.
>
> Serge VCF and VCS panels should be done this week!
>
> Scott Deyo
> contact@...
> The Bridechamber
> www.bridechamber.com
> Jealous Edison Record Kompany
> www.jealousedison.com
>
>
>
>
> On Jan 6, 2010, at 8:58 PM, Richard Brewster wrote:
>
>> I just ran across this link, which has all the details, including
>> photos
>> of each board in detail.
>>
>> http://mmm.sevcom.com/wiki/index.php/DIYcisions_DIYcisions
>>
>> Richard
>>
>> Richard Brewster wrote:
>>> Read this discussion thread on Muff Wiggler:
>>>
>>> http://www.muffwiggler.com/forum/viewtopic.php?t=469
>>>
>>> There is a photo of the boards included.
>>>
>>> Some of the MMM modules are interesting, such as the VCA with two
>>> different modulation inputs. The buffered multiple is a great idea,
>>> too. That one would have a simple panel.
>>>
>>> Richard
>>>
>>> Scott Deyo wrote:
>>>
>>>> What do the PCBs look like? Or did I miss that?
>>>>
>>>> For my money, I'd probably still go with MOTM or other (ahem)
>>>> boards
>>>> since nothing looked too different except maybe the VC Mixer.
>>>> As a standalone gigging modular it looks like a ton of fun, plus
>>>> I'd
>>>> love anything with "Jim Patchell" on it!!!!!!
>>>>
>>>> Scott Deyo
>>>> contact@... <mailto:contact@...>
>>>> The Bridechamber
>>>> www.bridechamber.com <http://www.bridechamber.com>
>>>> Jealous Edison Record Kompany
>>>> www.jealousedison.com <http://www.jealousedison.com>
>>>>
>>>>
>>>>
>>>>
>>>> On Jan 2, 2010, at 3:26 PM, Richard Brewster wrote:
>>>>
>>>>
>>>>> http://www.mattsonminimodular.com/ <http://www.mattsonminimodular.com/
>>>>> >
>>>>>
>>>>> Go to the store and look at the individual modules. Most have an
>>>>> assembled board available for $75.00. Time to crank up the panel
>>>>> design
>>>>> software for these! And how about a Bridechamber bracket with
>>>>> holes to
>>>>> match the MMM boards?
>>>>>
>>>>> Happy New Year,
>>>>>
>>>>> Richard
>>>>> http://pugix.com <http://pugix.com>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>

Do you have parts kits for the VCS. Not posted on the site parts kits page.

-----Original Message-----
From: Scott Deyo
Sent: Jan 10, 2010 9:31 PM
To: ModularSynthPanels@yahoogroups.com
Subject: Re: [ModularSynthPanels] Mattson Mini Modular assembled boards now available for DIY

 

Whoops, typo. Serge VCF panels are a month out, but CMOS VCF panels
will be done this week.

Scott Deyo
contact@bridechambe r.com
The Bridechamber
www.bridechamber. com
Jealous Edison Record Kompany
www.jealousedison. com

On Jan 10, 2010, at 1:30 PM, Scott Deyo wrote:

> Nice!
>
> I did a layout for the VC Mixer, which I may sneak onto the next
> run, which will be another huge one.
>
> Serge VCF and VCS panels should be done this week!
>
> Scott Deyo
> contact@bridechambe r.com
> The Bridechamber
> www.bridechamber. com
> Jealous Edison Record Kompany
> www.jealousedison. com
>
>
>
>
> On Jan 6, 2010, at 8:58 PM, Richard Brewster wrote:
>
>> I just ran across this link, which has all the details, including
>> photos
>> of each board in detail.
>>
>> http://mmm.sevcom. com/wiki/ index.php/ DIYcisions_ DIYcisions
>>
>> Richard
>>
>> Richard Brewster wrote:
>>> Read this discussion thread on Muff Wiggler:
>>>
>>> http://www.muffwigg ler.com/forum/ viewtopic. php?t=469
>>>
>>> There is a photo of the boards included.
>>>
>>> Some of the MMM modules are interesting, such as the VCA with two
>>> different modulation inputs. The buffered multiple is a great idea,
>>> too. That one would have a simple panel.
>>>
>>> Richard
>>>
>>> Scott Deyo wrote:
>>>
>>>> What do the PCBs look like? Or did I miss that?
>>>>
>>>> For my money, I'd probably still go with MOTM or other (ahem)
>>>> boards
>>>> since nothing looked too different except maybe the VC Mixer.
>>>> As a standalone gigging modular it looks like a ton of fun, plus
>>>> I'd
>>>> love anything with "Jim Patchell" on it!!!!!!
>>>>
>>>> Scott Deyo
>>>> contact@bridechambe r.com <mailto:contact@bridechambe r.com>
>>>> The Bridechamber
>>>> www.bridechamber. com <http://www.bridecha mber.com>
>>>> Jealous Edison Record Kompany
>>>> www.jealousedison. com <http://www.jealouse dison.com>
>>>>
>>>>
>>>>
>>>>
>>>> On Jan 2, 2010, at 3:26 PM, Richard Brewster wrote:
>>>>
>>>>
>>>>> http://www.mattsonm inimodular. com/ <http://www.mattsonm inimodular. com/
>>>>> >
>>>>>
>>>>> Go to the store and look at the individual modules. Most have an
>>>>> assembled board available for $75.00. Time to crank up the panel
>>>>> design
>>>>> software for these! And how about a Bridechamber bracket with
>>>>> holes to
>>>>> match the MMM boards?
>>>>>
>>>>> Happy New Year,
>>>>>
>>>>> Richard
>>>>> http://pugix. com <http://pugix. com>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>> ------------ --------- --------- ------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>> ------------ --------- --------- ------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>

Yup, I think it's there. $20 for the component kit. Once the panels are in I'll put full kits on the site too.

I just received my VC Mixer board from Mattson. I'm putting it into a
1U FPE panel with 3/4-inch MOTM type knobs. I'm still refining that
panel design and will upload it to the files section when done.

Mounting the PC board can't use a Bridechamber 3-jack bracket, because
the board mounting holes are on 2.5-inch centers, exactly the width of
the bracket. I'll have to get creative.

Richard


Scott Deyo wrote:

> Nice!
>
> I did a layout for the VC Mixer, which I may sneak onto the next run,
> which will be another huge one.
>
> Serge VCF and VCS panels should be done this week!
>
> Scott Deyo
> contact@...
> The Bridechamber
> www.bridechamber.com
> Jealous Edison Record Kompany
> www.jealousedison.com
>
>
>
>
> On Jan 6, 2010, at 8:58 PM, Richard Brewster wrote:
>
>
>> I just ran across this link, which has all the details, including
>> photos
>> of each board in detail.
>>
>> http://mmm.sevcom.com/wiki/index.php/DIYcisions_DIYcisions
>>
>> Richard
>>
>> Richard Brewster wrote:
>>
>>> Read this discussion thread on Muff Wiggler:
>>>
>>> http://www.muffwiggler.com/forum/viewtopic.php?t=469
>>>
>>> There is a photo of the boards included.
>>>
>>> Some of the MMM modules are interesting, such as the VCA with two
>>> different modulation inputs. The buffered multiple is a great idea,
>>> too. That one would have a simple panel.
>>>
>>> Richard
>>>
>>> Scott Deyo wrote:
>>>
>>>
>>>> What do the PCBs look like? Or did I miss that?
>>>>
>>>> For my money, I'd probably still go with MOTM or other (ahem) boards
>>>> since nothing looked too different except maybe the VC Mixer.
>>>> As a standalone gigging modular it looks like a ton of fun, plus I'd
>>>> love anything with "Jim Patchell" on it!!!!!!
>>>>
>>>> Scott Deyo
>>>> contact@... <mailto:contact@...>
>>>> The Bridechamber
>>>> www.bridechamber.com <http://www.bridechamber.com>
>>>> Jealous Edison Record Kompany
>>>> www.jealousedison.com <http://www.jealousedison.com>
>>>>
>>>>
>>>>
>>>>
>>>> On Jan 2, 2010, at 3:26 PM, Richard Brewster wrote:
>>>>
>>>>
>>>>
>>>>> http://www.mattsonminimodular.com/ <http://www.mattsonminimodular.com/
>>>>>
>>>>> Go to the store and look at the individual modules. Most have an
>>>>> assembled board available for $75.00. Time to crank up the panel
>>>>> design
>>>>> software for these! And how about a Bridechamber bracket with
>>>>> holes to
>>>>> match the MMM boards?
>>>>>
>>>>> Happy New Year,
>>>>>
>>>>> Richard
>>>>> http://pugix.com <http://pugix.com>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>> ------------------------------------
>>>
>>> Yahoo! Groups Links
>>>
>>>
>>>
>>>
>>>
>>>
>>
>> ------------------------------------
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>
>