Modular Synth Panels

Hi,

Does anybody have a FPD file for the CGS 59B preferably in MOTM
format but any will do.

Thanks,
Dave

Actually, the metal guys already have the layout for it, but I wasn't
sure about pushbutton hole sizes. Maybe I'll just do .375" and people
can drill them bigger if need be.

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On Sep 1, 2008, at 9:18 PM, Andrew Listmayer wrote:

> Krisp1 made a nice 5U x 5U version. As always, maybe we can harass
> Scott until he makes some for us ;)
>
> On Mon, Sep 1, 2008 at 10:05 PM, Dave <lexvortex@...> wrote:
>> Hi,
>>
>> Does anybody have a FPD file for the CGS 59B preferably in MOTM
>> format but any will do.
>>
>> Thanks,
>> Dave
>>
>>
>
>

Of course, by "harass" I meant make a casual mention of it and wait
for him to chime in and say "done!"

You rock!

----- Original Message -----

From: Andrew Listmayer

To: ModularSynthPanels@yahoogroups.com

Sent: Tuesday, September 02, 2008 3:18 AM

Subject: Re: [ModularSynthPanels] CGS sequencer programmer FPD

Krisp1 made a nice 5U x 5U version. As always, maybe we can harass Scott until he makes some for us ;)

On Mon, Sep 1, 2008 at 10:05 PM, Dave <lexvortex@yahoo. ca> wrote:

Hi,

Does anybody have a FPD file for the CGS 59B preferably in MOTM
format but any will do.

Thanks,
Dave

Great! thanks for the FPD :) Although if Scott is doing a panel for
this I can wait it out... Scott, any idea when this panel will come to
fruition? Will it be with the Klee panel?

Dave

--- In ModularSynthPanels@yahoogroups.com, "krisp" <krisp14u@...> wrote:
>
> I have added the FPD file and some photos files section
> If you need any help on the construction give me a shout also I have
some spare push buttons I used if anyone needs some
> not the easiest of builds but one hell of a module when you get it
working
>
> cheers
>
> Paul Darlow
>
> www.krisp1.com
>

I'm letting my original metal guys finish what they have right now --
Wogglebugs they missed, DoubleDekas, DotComs, and 2-pot brackets they
forgot. After that, they already have the layout for the Prog/ Seq, so
I'll get them going on that and the other big fellas. So... not for at
least 6 weeks, I'd guess.

Meanwhile, I'm getting designs to the new metal guys for JH and Oakley
stuff.

I toyed w/ the idea of ordering raw punched metal from FPD, so I
"stripped" the Doomsday panel FPD file down to holes and blank
aluminum... still $40 or something like that! I guess you pay for
convenience...

Cheers,
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On Sep 3, 2008, at 2:26 AM, Dave wrote:

> Great! thanks for the FPD :) Although if Scott is doing a panel for
> this I can wait it out... Scott, any idea when this panel will come to
> fruition? Will it be with the Klee panel?
>
> Dave
>
> --- In ModularSynthPanels@yahoogroups.com, "krisp" <krisp14u@...>
> wrote:
> >
> > I have added the FPD file and some photos files section
> > If you need any help on the construction give me a shout also I have
> some spare push buttons I used if anyone needs some
> > not the easiest of builds but one hell of a module when you get it
> working
> >
> > cheers
> >
> > Paul Darlow
> >
> > www.krisp1.com
> >
>
>
>