Modular Synth Panels

Has everyone seen this amazing sequencer yet?

http://www.electro-music.com/forum/viewtopic.php?t=27157

My jaw hit the floor when I saw the youtube vid so I have to have
2.I've been racking my brain trying to come up with a 4U MOTM format
layout with large(1") knobs for the step CV's, 3U with
dinky(3/4")knobs, or 2U with teensy(1/2")knobs and have had nothing
but failure so far.

According to the updated BOM you need 30 knobs(unless you can find and
use those fancy-dancy slide switches instead of rotaries) 4
push-buttons and 5 jacks. I'd prefer to keep it to the dimensions
listed above because IMO if your 8 step sequencer takes up 5U, you
fail. If it takes up 4U with dinky knobs, you fail. If it takes up 3U
with teensy knobs, you fail. So, either we need a stroke of genius or
a compromise(I don't like compromises).

Anyway, if enough of us are interested in this and if I (or anyone
else) can come up with a passable layout, perhaps we could hound Scott
into making us a panel?

thats an interesting design! -i just signed up for some boards.

the added stage select and divider functionality as panel option needs to be taken into account.


"CV stage control has been added, with a 0-10V buffered
input. "

"a switch selectable subdivision for gate repeat mode stages
which outputs gate pulses every 1, 2, 3, or 4 clock pulses
independently of the selected repeat amount. "

--- On Tue, 7/29/08, andrewlistmayer <andrewlistmayer@...> wrote:
From: andrewlistmayer <andrewlistmayer@...>
Subject: [ModularSynthPanels] Awesome new sequencer project at Eletro-Music
To: ModularSynthPanels@yahoogroups.com
Date: Tuesday, July 29, 2008, 12:00 PM











Has everyone seen this amazing sequencer yet?



http://www.electro- music.com/ forum/viewtopic. php?t=27157



My jaw hit the floor when I saw the youtube vid so I have to have

2.I've been racking my brain trying to come up with a 4U MOTM format

layout with large(1") knobs for the step CV's, 3U with

dinky(3/4")knobs, or 2U with teensy(1/2") knobs and have had nothing

but failure so far.



According to the updated BOM you need 30 knobs(unless you can find and

use those fancy-dancy slide switches instead of rotaries) 4

push-buttons and 5 jacks. I'd prefer to keep it to the dimensions

listed above because IMO if your 8 step sequencer takes up 5U, you

fail. If it takes up 4U with dinky knobs, you fail. If it takes up 3U

with teensy knobs, you fail. So, either we need a stroke of genius or

a compromise(I don't like compromises) .



Anyway, if enough of us are interested in this and if I (or anyone

else) can come up with a passable layout, perhaps we could hound Scott

into making us a panel?