Modular Synth Panels

Hello All,

Now that I'm delving into thinner metals for DotCom, is there any
interest out there for Frac format stuff?
I can't do CGS or Ian stuff (see Metalbox and Elby Designs for those),
but it would be easy to lay out MFOS and YuSynth stuff, maybe the 'Bug,
stuff like that.
I'd expect panels to be $20 for 2U, maybe even less.
I don't think I'd put out any MFOS stuff obviously already done so well
by Blacet, but I'm open to suggestions.
I'd have to come out w/ a new bracket, 4 .375" holes at 1.15" spacing,
which might be valuable in itself.

Whatchyall think?

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On 7/23/08, Scott Deyo <contact@...> wrote:

Hello All,

Now that I'm delving into thinner metals for DotCom, is there any
interest out there for Frac format stuff?
I can't do CGS or Ian stuff (see Metalbox and Elby Designs for those),
but it would be easy to lay out MFOS and YuSynth stuff, maybe the 'Bug,
stuff like that.
I'd expect panels to be $20 for 2U, maybe even less.
I don't think I'd put out any MFOS stuff obviously already done so well
by Blacet, but I'm open to suggestions.
I'd have to come out w/ a new bracket, 4 .375" holes at 1.15" spacing,
which might be valuable in itself.

Whatchyall think?

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

--
---------------------
http://www.kwotemusic.com
http://www.kwotemusic.com/store.html

Well, I'm just beginning to delve a little into that area with a new PAiA 9700 and will be very happy to add some other fancy modules to make live modular performance a bit more likely than hauling around my monster 1/4" rig:)
~Timmy C.

--- On Wed, 7/23/08, kwote uno <kwoter@...> wrote:

From: kwote uno <kwoter@...>
Subject: Re: [ModularSynthPanels] Frac Panel interest?
To: ModularSynthPanels@yahoogroups.com
Date: Wednesday, July 23, 2008, 11:13 AM

Yes and yes. I think you should still consider CGS as there are plenty of CGS modules not covered by Metalbox. A ton actually. I'd also love a panel for the SNVoice in frac as i'll be building 3 of them shortly.

 

Glad to hear you're considering this route.

 

-Chris

 

On 7/23/08, Scott Deyo <contact@bridechambe r.com> wrote:

Hello All,

Now that I'm delving into thinner metals for DotCom, is there any
interest out there for Frac format stuff?
I can't do CGS or Ian stuff (see Metalbox and Elby Designs for those),
but it would be easy to lay out MFOS and YuSynth stuff, maybe the 'Bug,
stuff like that.
I'd expect panels to be $20 for 2U, maybe even less.
I don't think I'd put out any MFOS stuff obviously already done so well
by Blacet, but I'm open to suggestions.
I'd have to come out w/ a new bracket, 4 .375" holes at 1.15" spacing,
which might be valuable in itself.

Whatchyall think?

Scott Deyo
The Bridechamber
contact@bridechambe r.com
http://www.bridecha mber.com
Jealous Edison Record Kompany
http://www.jealouse dison.com

--
------------ ---------
http://www.kwotemus ic.com
http://www.kwotemus ic.com/store. html

Yes, Interested in Frac format CGS, like Wave Multi, Cynare, Drum Sim etc

On 7/23/08, Erez Yaary <erez@...> wrote:

Yes, Interested in Frac format CGS, like Wave Multi, Cynare, Drum Sim etc

 

Thanks,

 

Erez Yaary

erez@...

http://www.yaary.com

 

 

.

--
---------------------
http://www.kwotemusic.com
http://www.kwotemusic.com/store.html

Here's another vote for Frac panels.

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> Hello All,
>
> Now that I'm delving into thinner metals for DotCom, is there any
> interest out there for Frac format stuff?
> I can't do CGS or Ian stuff (see Metalbox and Elby Designs for those),
> but it would be easy to lay out MFOS and YuSynth stuff, maybe the 'Bug,
> stuff like that.
> I'd expect panels to be $20 for 2U, maybe even less.
> I don't think I'd put out any MFOS stuff obviously already done so well
> by Blacet, but I'm open to suggestions.
> I'd have to come out w/ a new bracket, 4 .375" holes at 1.15" spacing,
> which might be valuable in itself.
>
> Whatchyall think?
>
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>

Yes, plus one for Frac.

I think that I screwed up my last post.

YES!!! Bring forth the Blacet! I’ve got tons of projects scheduled and the parts are accumulating. I hate making panels enough to order them from Europe in order to avoid it. Bad-ass panels for a fader-equipped version of the Klee would be highly cool as well.

i thot you'd never ask. YES, absolutely.

also, i appreciate & respect your consideration for metalbox--very
glad to see that kind of integrity. but my sense is there's not so
much overlap between DIYers and folks who want to build complete
modules. and i can imagine them actually selling more prebuilt
modules if their front panels included dial markings etc... might
lower their costs, too. so maybe there could be some mutual benefit
to everyone if you did panels for their modules, and also sold them
naked for us solderhuffers. worth asking, i think.

bbob

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
wrote:

>
> Hello All,
>
> Now that I'm delving into thinner metals for DotCom, is there any
> interest out there for Frac format stuff?
> I can't do CGS or Ian stuff (see Metalbox and Elby Designs for

those),

> but it would be easy to lay out MFOS and YuSynth stuff, maybe

the 'Bug,

> stuff like that.
> I'd expect panels to be $20 for 2U, maybe even less.
> I don't think I'd put out any MFOS stuff obviously already done so

well

> by Blacet, but I'm open to suggestions.
> I'd have to come out w/ a new bracket, 4 .375" holes at 1.15"

spacing,

> which might be valuable in itself.
>
> Whatchyall think?
>
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>

Yeah, I'll feel out the situ.
I wouldn't mind just doing panels, and no full kits or assembled
modules.
I want to be considerate, but I also want DIYers to have nice panels.
The mutual benefit thing might work, though I think I brought it up to
Metalbox before.
I'll keep all y'all posted, sounds like there is plenty of interest!

Cheers,
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On Jul 23, 2008, at 6:27 PM, data2action wrote:

> i thot you'd never ask. YES, absolutely.
>
> also, i appreciate & respect your consideration for metalbox--very
> glad to see that kind of integrity. but my sense is there's not so
> much overlap between DIYers and folks who want to build complete
> modules. and i can imagine them actually selling more prebuilt
> modules if their front panels included dial markings etc... might
> lower their costs, too. so maybe there could be some mutual benefit
> to everyone if you did panels for their modules, and also sold them
> naked for us solderhuffers. worth asking, i think.
>
> bbob
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
> wrote:
> >
> > Hello All,
> >
> > Now that I'm delving into thinner metals for DotCom, is there any
> > interest out there for Frac format stuff?
> > I can't do CGS or Ian stuff (see Metalbox and Elby Designs for
> those),
> > but it would be easy to lay out MFOS and YuSynth stuff, maybe
> the 'Bug,
> > stuff like that.
> > I'd expect panels to be $20 for 2U, maybe even less.
> > I don't think I'd put out any MFOS stuff obviously already done so
> well
> > by Blacet, but I'm open to suggestions.
> > I'd have to come out w/ a new bracket, 4 .375" holes at 1.15"
> spacing,
> > which might be valuable in itself.
> >
> > Whatchyall think?
> >
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
>
>
>

Hey Scott, just reading through some of the old threads..

Just wondering what happened with any plans for frac panel
fabrication? I am certainly interested in any frac format panels you
produce..I would LOVE the tau pipe..i'm sure the wogglebug would be
popular!

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> Yeah, I'll feel out the situ.
> I wouldn't mind just doing panels, and no full kits or assembled
> modules.
> I want to be considerate, but I also want DIYers to have nice panels.
> The mutual benefit thing might work, though I think I brought it up to
> Metalbox before.
> I'll keep all y'all posted, sounds like there is plenty of interest!
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Jul 23, 2008, at 6:27 PM, data2action wrote:
>
> > i thot you'd never ask. YES, absolutely.
> >
> > also, i appreciate & respect your consideration for metalbox--very
> > glad to see that kind of integrity. but my sense is there's not so
> > much overlap between DIYers and folks who want to build complete
> > modules. and i can imagine them actually selling more prebuilt
> > modules if their front panels included dial markings etc... might
> > lower their costs, too. so maybe there could be some mutual benefit
> > to everyone if you did panels for their modules, and also sold them
> > naked for us solderhuffers. worth asking, i think.
> >
> > bbob
> >
> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > wrote:
> > >
> > > Hello All,
> > >
> > > Now that I'm delving into thinner metals for DotCom, is there any
> > > interest out there for Frac format stuff?
> > > I can't do CGS or Ian stuff (see Metalbox and Elby Designs for
> > those),
> > > but it would be easy to lay out MFOS and YuSynth stuff, maybe
> > the 'Bug,
> > > stuff like that.
> > > I'd expect panels to be $20 for 2U, maybe even less.
> > > I don't think I'd put out any MFOS stuff obviously already done so
> > well
> > > by Blacet, but I'm open to suggestions.
> > > I'd have to come out w/ a new bracket, 4 .375" holes at 1.15"
> > spacing,
> > > which might be valuable in itself.
> > >
> > > Whatchyall think?
> > >
> > > Scott Deyo
> > > The Bridechamber
> > > contact@
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> >
> >
> >
>

I would be very interested in FracRack Panels, too. I have a Tau Phaser,
Mankato, JH FS1A, waiting for FracRack panel designs. I've got one for the
frequency shifter mostly done, but it is quite bare bones.

David

From: ModularSynthPanels@yahoogroups.com
[mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of hulmedan
Sent: Tuesday, October 14, 2008 1:38 PM
To: ModularSynthPanels@yahoogroups.com
Subject: [ModularSynthPanels] Re: Frac Panel interest?

Hey Scott, just reading through some of the old threads..

Just wondering what happened with any plans for frac panel
fabrication? I am certainly interested in any frac format panels you
produce..I would LOVE the tau pipe..i'm sure the wogglebug would be
popular!

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> Yeah, I'll feel out the situ.
> I wouldn't mind just doing panels, and no full kits or assembled
> modules.
> I want to be considerate, but I also want DIYers to have nice panels.
> The mutual benefit thing might work, though I think I brought it up to
> Metalbox before.
> I'll keep all y'all posted, sounds like there is plenty of interest!
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Jul 23, 2008, at 6:27 PM, data2action wrote:
>
> > i thot you'd never ask. YES, absolutely.
> >
> > also, i appreciate & respect your consideration for metalbox--very
> > glad to see that kind of integrity. but my sense is there's not so
> > much overlap between DIYers and folks who want to build complete
> > modules. and i can imagine them actually selling more prebuilt
> > modules if their front panels included dial markings etc... might
> > lower their costs, too. so maybe there could be some mutual benefit
> > to everyone if you did panels for their modules, and also sold them
> > naked for us solderhuffers. worth asking, i think.
> >
> > bbob
> >
> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > wrote:
> > >
> > > Hello All,
> > >
> > > Now that I'm delving into thinner metals for DotCom, is there any
> > > interest out there for Frac format stuff?
> > > I can't do CGS or Ian stuff (see Metalbox and Elby Designs for
> > those),
> > > but it would be easy to lay out MFOS and YuSynth stuff, maybe
> > the 'Bug,
> > > stuff like that.
> > > I'd expect panels to be $20 for 2U, maybe even less.
> > > I don't think I'd put out any MFOS stuff obviously already done so
> > well
> > > by Blacet, but I'm open to suggestions.
> > > I'd have to come out w/ a new bracket, 4 .375" holes at 1.15"
> > spacing,
> > > which might be valuable in itself.
> > >
> > > Whatchyall think?
> > >
> > > Scott Deyo
> > > The Bridechamber
> > > contact@
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> >
> >
> >
>

I'm looking to get a Tau Phaser kit soon aswell, and would be making
it into a Frac panel. Does anyone have a design for this already?

Thx

--- In ModularSynthPanels@yahoogroups.com, "David Ingebretsen"
<dingebre@...> wrote:

>
> I would be very interested in FracRack Panels, too. I have a Tau Phaser,
> Mankato, JH FS1A, waiting for FracRack panel designs. I've got one

for the

> frequency shifter mostly done, but it is quite bare bones.
>
> David
>
> From: ModularSynthPanels@yahoogroups.com
> [mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of hulmedan
> Sent: Tuesday, October 14, 2008 1:38 PM
> To: ModularSynthPanels@yahoogroups.com
> Subject: [ModularSynthPanels] Re: Frac Panel interest?
>
> Hey Scott, just reading through some of the old threads..
>
> Just wondering what happened with any plans for frac panel
> fabrication? I am certainly interested in any frac format panels you
> produce..I would LOVE the tau pipe..i'm sure the wogglebug would be
> popular!
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@> wrote:
> >
> > Yeah, I'll feel out the situ.
> > I wouldn't mind just doing panels, and no full kits or assembled
> > modules.
> > I want to be considerate, but I also want DIYers to have nice panels.
> > The mutual benefit thing might work, though I think I brought it

up to

> > Metalbox before.
> > I'll keep all y'all posted, sounds like there is plenty of interest!
> >
> > Cheers,
> > Scott Deyo
> > The Bridechamber
> > contact@
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On Jul 23, 2008, at 6:27 PM, data2action wrote:
> >
> > > i thot you'd never ask. YES, absolutely.
> > >
> > > also, i appreciate & respect your consideration for metalbox--very
> > > glad to see that kind of integrity. but my sense is there's not so
> > > much overlap between DIYers and folks who want to build complete
> > > modules. and i can imagine them actually selling more prebuilt
> > > modules if their front panels included dial markings etc... might
> > > lower their costs, too. so maybe there could be some mutual benefit
> > > to everyone if you did panels for their modules, and also sold them
> > > naked for us solderhuffers. worth asking, i think.
> > >
> > > bbob
> > >
> > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > > wrote:
> > > >
> > > > Hello All,
> > > >
> > > > Now that I'm delving into thinner metals for DotCom, is there any
> > > > interest out there for Frac format stuff?
> > > > I can't do CGS or Ian stuff (see Metalbox and Elby Designs for
> > > those),
> > > > but it would be easy to lay out MFOS and YuSynth stuff, maybe
> > > the 'Bug,
> > > > stuff like that.
> > > > I'd expect panels to be $20 for 2U, maybe even less.
> > > > I don't think I'd put out any MFOS stuff obviously already done so
> > > well
> > > > by Blacet, but I'm open to suggestions.
> > > > I'd have to come out w/ a new bracket, 4 .375" holes at 1.15"
> > > spacing,
> > > > which might be valuable in itself.
> > > >
> > > > Whatchyall think?
> > > >
> > > > Scott Deyo
> > > > The Bridechamber
> > > > contact@
> > > > http://www.bridechamber.com
> > > > Jealous Edison Record Kompany
> > > > http://www.jealousedison.com
> > > >
> > >
> > >
> > >
> >
>

I'm still planning on doing some, but I've got new metal guys who are
faster, but they're busy on a bunch of other stuff right now.
Frac... early next year is what I'm thinkin'.

Thanks,
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On Oct 14, 2008, at 2:37 PM, hulmedan wrote:

> Hey Scott, just reading through some of the old threads..
>
> Just wondering what happened with any plans for frac panel
> fabrication? I am certainly interested in any frac format panels you
> produce..I would LOVE the tau pipe..i'm sure the wogglebug would be
> popular!
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
> wrote:
> >
> > Yeah, I'll feel out the situ.
> > I wouldn't mind just doing panels, and no full kits or assembled
> > modules.
> > I want to be considerate, but I also want DIYers to have nice
> panels.
> > The mutual benefit thing might work, though I think I brought it up
> to
> > Metalbox before.
> > I'll keep all y'all posted, sounds like there is plenty of interest!
> >
> > Cheers,
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On Jul 23, 2008, at 6:27 PM, data2action wrote:
> >
> > > i thot you'd never ask. YES, absolutely.
> > >
> > > also, i appreciate & respect your consideration for metalbox--very
> > > glad to see that kind of integrity. but my sense is there's not so
> > > much overlap between DIYers and folks who want to build complete
> > > modules. and i can imagine them actually selling more prebuilt
> > > modules if their front panels included dial markings etc... might
> > > lower their costs, too. so maybe there could be some mutual
> benefit
> > > to everyone if you did panels for their modules, and also sold
> them
> > > naked for us solderhuffers. worth asking, i think.
> > >
> > > bbob
> > >
> > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > > wrote:
> > > >
> > > > Hello All,
> > > >
> > > > Now that I'm delving into thinner metals for DotCom, is there
> any
> > > > interest out there for Frac format stuff?
> > > > I can't do CGS or Ian stuff (see Metalbox and Elby Designs for
> > > those),
> > > > but it would be easy to lay out MFOS and YuSynth stuff, maybe
> > > the 'Bug,
> > > > stuff like that.
> > > > I'd expect panels to be $20 for 2U, maybe even less.
> > > > I don't think I'd put out any MFOS stuff obviously already done
> so
> > > well
> > > > by Blacet, but I'm open to suggestions.
> > > > I'd have to come out w/ a new bracket, 4 .375" holes at 1.15"
> > > spacing,
> > > > which might be valuable in itself.
> > > >
> > > > Whatchyall think?
> > > >
> > > > Scott Deyo
> > > > The Bridechamber
> > > > contact@
> > > > http://www.bridechamber.com
> > > > Jealous Edison Record Kompany
> > > > http://www.jealousedison.com
> > > >
> > >
> > >
> > >
> >
>
>
>

Awesome. I'd especially be interested in a Woggle #3 panel for Frac - but just doing Frac in
general would make me very happy!

Thanks,
//Chris

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> I'm still planning on doing some, but I've got new metal guys who are
> faster, but they're busy on a bunch of other stuff right now.
> Frac... early next year is what I'm thinkin'.
>
> Thanks,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com

I WOULD BUY FRAC PANELS!!! in a second

in fact havent i bugged you about this before ;)

good news

thanks