Modular Synth Panels

Scott, have you started on your next round of panels yet? If yes, what are they? If no, what are you planning on ;)

Are you going to offer panels for the Ian Fritz & Wogglebug circuits? And how about some of those super-cali-fragelous-expie-aela-docious-crazy CGS modules (burst gen, logic modules, ASR, etc).....

My wallet wants to give you more money!

-Jim

I'm hounding my metal guys, but they've been busy. I think they have
the metal already, but they have to finish the design proofs so I can
OK them, and then they'll take a couple days to punch them. Then off to
the painters/ silkscreeners... I'm hoping two weeks.

What are they? Good question! : )
2U 'Bug, 3U SN Voice, Ian's stuff... what else? I can't remember!

I really want to catch up on Jurgen's and CGS stuff after this, plus
the CVS, plus some more Tellun and MFOS and Oakley, plus the Double
Wogglebug, more Ian stuff, etc. etc. etc. etc. etc.

Cheers,
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On May 13, 2008, at 11:00 PM, James Elliott wrote:

> Scott, have you started on your next round of panels yet? If yes, what
> are they? If no, what are you planning on ;)
>
> Are you going to offer panels for the Ian Fritz & Wogglebug circuits?
> And how about some of those
> super-cali-fragelous-expie-aela-docious-crazy CGS modules (burst gen,
> logic modules, ASR, etc).....
>
> My wallet wants to give you more money!
>
> -Jim
>
>
>

cgs weighted switch w/ switch matrix!

What's in the current round, Scott? I've forgotten. Bill (& Will)

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> I'm hounding my metal guys, but they've been busy. I think they have
> the metal already, but they have to finish the design proofs so I can
> OK them, and then they'll take a couple days to punch them. Then off to
> the painters/ silkscreeners... I'm hoping two weeks.
>
> What are they? Good question! : )
> 2U 'Bug, 3U SN Voice, Ian's stuff... what else? I can't remember!
>
> I really want to catch up on Jurgen's and CGS stuff after this, plus
> the CVS, plus some more Tellun and MFOS and Oakley, plus the Double
> Wogglebug, more Ian stuff, etc. etc. etc. etc. etc.
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On May 13, 2008, at 11:00 PM, James Elliott wrote:
>
> > Scott, have you started on your next round of panels yet? If yes,
what
> > are they? If no, what are you planning on ;)
> >
> > Are you going to offer panels for the Ian Fritz & Wogglebug
circuits?
> > And how about some of those
> > super-cali-fragelous-expie-aela-docious-crazy CGS modules (burst gen,
> > logic modules, ASR, etc).....
> >
> > My wallet wants to give you more money!
> >
> > -Jim
> >
> >
> >
>

Well, that is the current round. The next round (which I'll be starting
even before this one is done) will have the other Jurgen stuff and CVS
for sure.

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On May 13, 2008, at 11:56 PM, wjhall11 wrote:

> What's in the current round, Scott? I've forgotten. Bill (& Will)
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
> wrote:
> >
> > I'm hounding my metal guys, but they've been busy. I think they have
> > the metal already, but they have to finish the design proofs so I
> can
> > OK them, and then they'll take a couple days to punch them. Then
> off to
> > the painters/ silkscreeners... I'm hoping two weeks.
> >
> > What are they? Good question! : )
> > 2U 'Bug, 3U SN Voice, Ian's stuff... what else? I can't remember!
> >
> > I really want to catch up on Jurgen's and CGS stuff after this, plus
> > the CVS, plus some more Tellun and MFOS and Oakley, plus the Double
> > Wogglebug, more Ian stuff, etc. etc. etc. etc. etc.
> >
> > Cheers,
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On May 13, 2008, at 11:00 PM, James Elliott wrote:
> >
> > > Scott, have you started on your next round of panels yet? If yes,
> what
> > > are they? If no, what are you planning on ;)
> > >
> > > Are you going to offer panels for the Ian Fritz & Wogglebug
> circuits?
> > > And how about some of those
> > > super-cali-fragelous-expie-aela-docious-crazy CGS modules (burst
> gen,
> > > logic modules, ASR, etc).....
> > >
> > > My wallet wants to give you more money!
> > >
> > > -Jim
> > >
> > >
> > >
> >
>
>
>

I've got most of those laid out, just need to roll on 'em...

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On May 13, 2008, at 11:33 PM, david wright wrote:

> cgs weighted switch w/ switch matrix!
> morph lag!
> gate seq! prog seq! tellun 3320 lowpass!
> all of ian's stuff!
>
> ;)
>
>
> d
> lookin forward to fill www.notbreathing.com/newcabsofar.jpg
>
>
> On May 13, 2008, at 9:13 PM, Scott Deyo wrote:
>
>> I'm hounding my metal guys, but they've been busy. I think they have
>> the metal already, but they have to finish the design proofs so I can
>> OK them, and then they'll take a couple days to punch them. Then off
>> to the painters/ silkscreeners... I'm hoping two weeks.
>>
>> What are they? Good question! : )
>> 2U 'Bug, 3U SN Voice, Ian's stuff... what else? I can't remember!
>>
>> I really want to catch up on Jurgen's and CGS stuff after this, plus
>> the CVS, plus some more Tellun and MFOS and Oakley, plus the Double
>> Wogglebug, more Ian stuff, etc. etc. etc. etc. etc. 
>>
>> Cheers,
>> Scott Deyo
>> The Bridechamber
>> contact@...
>> http://www.bridechamber.com
>> Jealous Edison Record Kompany
>> http://www.jealousedison.com
>>
>>
>> On May 13, 2008, at 11:00 PM, James Elliott wrote:
>>
>>> Scott, have you started on your next round of panels yet? If yes,
>>> what are they? If no, what are you planning on ;)
>>>
>>>  Are you going to offer panels for the Ian Fritz & Wogglebug
>>> circuits? And how about some of those
>>> super-cali-fragelous-expie-aela-docious-crazy CGS modules (burst
>>> gen, logic modules, ASR, etc).....
>>>
>>>  My wallet wants to give you more money!
>>>
>>>  -Jim
>
> dave wright
> www.notbreathing.com
> bastardita@...
>
>
>
>
>
>
>

I've got some of your KITS  on the radar Scott, thanks for providing these!

It's probably mentioned somewhere but these panels/kits look like their MOTM size/style am I correct?

I have a synth.com PS and got the MOTM daughter board to power MOTM modules off of them.

Am I on the right track?

Yes I am a full on newbie... FNG (phunking New Guy)

This is my first post here BTW...


Steve

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> I'm hounding my metal guys, but they've been busy. I think they have
> the metal already, but they have to finish the design proofs so I can
> OK them, and then they'll take a couple days to punch them. Then off to
> the painters/ silkscreeners... I'm hoping two weeks.
>
> What are they? Good question! : )
> 2U 'Bug, 3U SN Voice, Ian's stuff... what else? I can't remember!
>
> I really want to catch up on Jurgen's and CGS stuff after this, plus
> the CVS, plus some more Tellun and MFOS and Oakley, plus the Double
> Wogglebug, more Ian stuff, etc. etc. etc. etc. etc.
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On May 13, 2008, at 11:00 PM, James Elliott wrote:
>
> > Scott, have you started on your next round of panels yet? If yes, what
> > are they? If no, what are you planning on ;)
> >
> > Are you going to offer panels for the Ian Fritz & Wogglebug circuits?
> > And how about some of those
> > super-cali-fragelous-expie-aela-docious-crazy CGS modules (burst gen,
> > logic modules, ASR, etc).....
> >
> > My wallet wants to give you more money!
> >
> > -Jim
> >
> >
> >
>

CGS comparator, White's sequencer and whatever next two things Juergen is doing

魚手
Gino Wong
Engineer, Studio Supervisor
LBPH
(800) 222-1754

Welcome Steven,

Correct, they are all for MOTM. DotCom is on the way, but I've been
saying that for a year now. Really, though, I will get them done.

You are indeed on the right track w/ the power supply.

Cheers,
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On May 14, 2008, at 4:23 PM, Steven Clements wrote:

>
> I've got some of your KITS  on the radar Scott, thanks for providing
> these!
>
> It's probably mentioned somewhere but these panels/kits look like
> their MOTM size/style am I correct?
>
> I have a synth.com PS and got the MOTM daughter board to power MOTM
> modules off of them.
>
> Am I on the right track?
>
> Yes I am a full on newbie... FNG (phunking New Guy)
>
> This is my first post here BTW...
> <04.gif>
>
> Steve
>
>
>
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
> wrote:
> >
> > I'm hounding my metal guys, but they've been busy. I think they have
> > the metal already, but they have to finish the design proofs so I can
> > OK them, and then they'll take a couple days to punch them. Then off
> to
> > the painters/ silkscreeners... I'm hoping two weeks.
> >
> > What are they? Good question! : )
> > 2U 'Bug, 3U SN Voice, Ian's stuff... what else? I can't remember!
> >
> > I really want to catch up on Jurgen's and CGS stuff after this, plus
> > the CVS, plus some more Tellun and MFOS and Oakley, plus the Double
> > Wogglebug, more Ian stuff, etc. etc. etc. etc. etc.
> >
> > Cheers,
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On May 13, 2008, at 11:00 PM, James Elliott wrote:
> >
> > > Scott, have you started on your next round of panels yet? If yes,
> what
> > > are they? If no, what are you planning on ;)
> > >
> > > Are you going to offer panels for the Ian Fritz & Wogglebug
> circuits?
> > > And how about some of those
> > > super-cali-fragelous-expie-aela-docious-crazy CGS modules (burst
> gen,
> > > logic modules, ASR, etc).....
> > >
> > > My wallet wants to give you more money!
> > >
> > > -Jim
> > >
> > >
> > >
> >
>
>

Yup. They're all in line.

I was playing w/ my comparator the other day. I'll make a sound sample
of it soon. I love it!

Cheers,
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On May 14, 2008, at 8:10 PM, gino wong wrote:

> CGS comparator, White's sequencer and whatever next two things Juergen
> is doing
>
> 魚手
> Gino Wong
> Engineer, Studio Supervisor
> LBPH
> (800) 222-1754
>
>

yo! cgs comparator rules! www.notbreathing.com/comparatorwhale.mp3

--
---------------------
http://www.kwotemusic.com
http://www.kwotemusic.com/store.html

Hi Scott and others -

Any chance of a Klee sequencer panel? Ala Will and Bill or
ClickrMike's designs? I've got almost everything together to build one
except for the panel. I've got an .fpd of a hybrid of the 2
aforementioned designs almost finalized, but the price - it's hard to
knock it under about 140$ even using all sorts of cost cutting tricks.

As there may not be much demand for it, I'm not holding my breath, but
sometimes just mentioning things gets the blood running. So to speak.

Steve

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> Welcome Steven,
>
> Correct, they are all for MOTM. DotCom is on the way, but I've been
> saying that for a year now. Really, though, I will get them done.
>
> You are indeed on the right track w/ the power supply.
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>

I was hoping to do a slider version of the Klee, but we'll see.
If not, I'll do the, uh... "standard" version ; )

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On May 14, 2008, at 11:16 PM, sduck409 wrote:

> Hi Scott and others -
>
> Any chance of a Klee sequencer panel? Ala Will and Bill or
> ClickrMike's designs? I've got almost everything together to build one
> except for the panel. I've got an .fpd of a hybrid of the 2
> aforementioned designs almost finalized, but the price - it's hard to
> knock it under about 140$ even using all sorts of cost cutting tricks.
>
> As there may not be much demand for it, I'm not holding my breath, but
> sometimes just mentioning things gets the blood running. So to speak.
>
> Steve
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
> wrote:
> >
> > Welcome Steven,
> >
> > Correct, they are all for MOTM. DotCom is on the way, but I've been
> > saying that for a year now. Really, though, I will get them done.
> >
> > You are indeed on the right track w/ the power supply.
> >
> > Cheers,
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
>
>
>

Actually, I'd be all for a slider version of the Klee. I did the
"Milton-esque" version in case I couldn't find sliders that worked
well. I really think it needs to fit into 8 or 10 U max.

clickmrmike

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> I was hoping to do a slider version of the Klee, but we'll see.
> If not, I'll do the, uh... "standard" version ; )
>
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On May 14, 2008, at 11:16 PM, sduck409 wrote:
>
> > Hi Scott and others -
> >
> > Any chance of a Klee sequencer panel? Ala Will and Bill or
> > ClickrMike's designs? I've got almost everything together to
build one
> > except for the panel. I've got an .fpd of a hybrid of the 2
> > aforementioned designs almost finalized, but the price - it's hard to
> > knock it under about 140$ even using all sorts of cost cutting
tricks.
> >
> > As there may not be much demand for it, I'm not holding my
breath, but
> > sometimes just mentioning things gets the blood running. So to speak.
> >
> > Steve
> >
> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > wrote:
> > >
> > > Welcome Steven,
> > >
> > > Correct, they are all for MOTM. DotCom is on the way, but I've been
> > > saying that for a year now. Really, though, I will get them done.
> > >
> > > You are indeed on the right track w/ the power supply.
> > >
> > > Cheers,
> > > Scott Deyo
> > > The Bridechamber
> > > contact@
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> > >
> >
> >
> >
>

Woah! A slider version of the Klee? Count me in! I was thinking I'd
have to bug you to do a one-off for me. As long as it fits in 8U, you
have my money.

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> I was hoping to do a slider version of the Klee, but we'll see.
> If not, I'll do the, uh... "standard" version ; )
>
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On May 14, 2008, at 11:16 PM, sduck409 wrote:
>
> > Hi Scott and others -
> >
> > Any chance of a Klee sequencer panel? Ala Will and Bill or
> > ClickrMike's designs? I've got almost everything together to
build one
> > except for the panel. I've got an .fpd of a hybrid of the 2
> > aforementioned designs almost finalized, but the price - it's hard to
> > knock it under about 140$ even using all sorts of cost cutting
tricks.
> >
> > As there may not be much demand for it, I'm not holding my
breath, but
> > sometimes just mentioning things gets the blood running. So to speak.
> >
> > Steve
> >
> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > wrote:
> > >
> > > Welcome Steven,
> > >
> > > Correct, they are all for MOTM. DotCom is on the way, but I've been
> > > saying that for a year now. Really, though, I will get them done.
> > >
> > > You are indeed on the right track w/ the power supply.
> > >
> > > Cheers,
> > > Scott Deyo
> > > The Bridechamber
> > > contact@
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> > >
> >
> >
> >
>

Scott, I'd love it if you did a Klee panel!! especially with sliders
in MOTM format!!! If this were to be a reality, when could we hope to
see the Klee panel? And how much? I'm working on a FPD panel, but
this is my first one and I don't really want to spend all that money
and realize when I got it I made some stupid little errors.

--- In ModularSynthPanels@yahoogroups.com, "clickmrmike" <mrmike@...>
wrote:

>
> Actually, I'd be all for a slider version of the Klee. I did the
> "Milton-esque" version in case I couldn't find sliders that worked
> well. I really think it needs to fit into 8 or 10 U max.
>
> clickmrmike
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@> wrote:
> >
> > I was hoping to do a slider version of the Klee, but we'll see.
> > If not, I'll do the, uh... "standard" version ; )
> >
> > Scott Deyo
> > The Bridechamber
> > contact@
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On May 14, 2008, at 11:16 PM, sduck409 wrote:
> >
> > > Hi Scott and others -
> > >
> > > Any chance of a Klee sequencer panel? Ala Will and Bill or
> > > ClickrMike's designs? I've got almost everything together to
> build one
> > > except for the panel. I've got an .fpd of a hybrid of the 2
> > > aforementioned designs almost finalized, but the price - it's

hard to

> > > knock it under about 140$ even using all sorts of cost cutting
> tricks.
> > >
> > > As there may not be much demand for it, I'm not holding my
> breath, but
> > > sometimes just mentioning things gets the blood running. So to

speak.

> > >
> > > Steve
> > >
> > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > > wrote:
> > > >
> > > > Welcome Steven,
> > > >
> > > > Correct, they are all for MOTM. DotCom is on the way, but

I've been

> > > > saying that for a year now. Really, though, I will get them done.
> > > >
> > > > You are indeed on the right track w/ the power supply.
> > > >
> > > > Cheers,
> > > > Scott Deyo
> > > > The Bridechamber
> > > > contact@
> > > > http://www.bridechamber.com
> > > > Jealous Edison Record Kompany
> > > > http://www.jealousedison.com
> > > >
> > > >
> > >
> > >
> > >
> >
>

To be realistic, that probaby won't be done until mid-summer at the
earliest.
But it will probably be around $100 less than FPE.

Cheers,
Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On May 15, 2008, at 1:15 PM, lexvortex wrote:

> Scott, I'd love it if you did a Klee panel!! especially with sliders
> in MOTM format!!! If this were to be a reality, when could we hope to
> see the Klee panel? And how much? I'm working on a FPD panel, but
> this is my first one and I don't really want to spend all that money
> and realize when I got it I made some stupid little errors.
>
> --- In ModularSynthPanels@yahoogroups.com, "clickmrmike" <mrmike@...>
> wrote:
> >
> > Actually, I'd be all for a slider version of the Klee. I did the
> > "Milton-esque" version in case I couldn't find sliders that worked
> > well. I really think it needs to fit into 8 or 10 U max.
> >
> > clickmrmike
> >
> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> wrote:
> > >
> > > I was hoping to do a slider version of the Klee, but we'll see.
> > > If not, I'll do the, uh... "standard" version ; )
> > >
> > > Scott Deyo
> > > The Bridechamber
> > > contact@
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> > >
> > > On May 14, 2008, at 11:16 PM, sduck409 wrote:
> > >
> > > > Hi Scott and others -
> > > >
> > > > Any chance of a Klee sequencer panel? Ala Will and Bill or
> > > > ClickrMike's designs? I've got almost everything together to
> > build one
> > > > except for the panel. I've got an .fpd of a hybrid of the 2
> > > > aforementioned designs almost finalized, but the price - it's
> hard to
> > > > knock it under about 140$ even using all sorts of cost cutting
> > tricks.
> > > >
> > > > As there may not be much demand for it, I'm not holding my
> > breath, but
> > > > sometimes just mentioning things gets the blood running. So to
> speak.
> > > >
> > > > Steve
> > > >
> > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > > > wrote:
> > > > >
> > > > > Welcome Steven,
> > > > >
> > > > > Correct, they are all for MOTM. DotCom is on the way, but
> I've been
> > > > > saying that for a year now. Really, though, I will get them
> done.
> > > > >
> > > > > You are indeed on the right track w/ the power supply.
> > > > >
> > > > > Cheers,
> > > > > Scott Deyo
> > > > > The Bridechamber
> > > > > contact@
> > > > > http://www.bridechamber.com
> > > > > Jealous Edison Record Kompany
> > > > > http://www.jealousedison.com
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > >
> >
>
>
>

Crap - am I the only one who wants knobs?

> To be realistic, that probaby won't be done until mid-summer at the
> earliest.
> But it will probably be around $100 less than FPE.
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On May 15, 2008, at 1:15 PM, lexvortex wrote:
>
>> Scott, I'd love it if you did a Klee panel!! especially with sliders
>> in MOTM format!!! If this were to be a reality, when could we
>> hope to
>> see the Klee panel? And how much? I'm working on a FPD panel, but
>> this is my first one and I don't really want to spend all that money
>> and realize when I got it I made some stupid little errors.
>>
>> --- In ModularSynthPanels@yahoogroups.com, "clickmrmike"
>> <mrmike@...>
>> wrote:
>> >
>> > Actually, I'd be all for a slider version of the Klee. I did the
>> > "Milton-esque" version in case I couldn't find sliders that worked
>> > well. I really think it needs to fit into 8 or 10 U max.
>> >
>> > clickmrmike
>> >
>> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo
>> <contact@> wrote:
>> > >
>> > > I was hoping to do a slider version of the Klee, but we'll see.
>> > > If not, I'll do the, uh... "standard" version ; )
>> > >
>> > > Scott Deyo
>> > > The Bridechamber
>> > > contact@
>> > > http://www.bridechamber.com
>> > > Jealous Edison Record Kompany
>> > > http://www.jealousedison.com
>> > >
>> > >
>> > > On May 14, 2008, at 11:16 PM, sduck409 wrote:
>> > >
>> > > > Hi Scott and others -
>> > > >
>> > > > Any chance of a Klee sequencer panel? Ala Will and Bill or
>> > > > ClickrMike's designs? I've got almost everything together to
>> > build one
>> > > > except for the panel. I've got an .fpd of a hybrid of the 2
>> > > > aforementioned designs almost finalized, but the price - it's
>> hard to
>> > > > knock it under about 140$ even using all sorts of cost cutting
>> > tricks.
>> > > >
>> > > > As there may not be much demand for it, I'm not holding my
>> > breath, but
>> > > > sometimes just mentioning things gets the blood running. So to
>> speak.
>> > > >
>> > > > Steve
>> > > >
>> > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo
>> <contact@>
>> > > > wrote:
>> > > > >
>> > > > > Welcome Steven,
>> > > > >
>> > > > > Correct, they are all for MOTM. DotCom is on the way, but
>> I've been
>> > > > > saying that for a year now. Really, though, I will get
>> them done.
>> > > > >
>> > > > > You are indeed on the right track w/ the power supply.
>> > > > >
>> > > > > Cheers,
>> > > > > Scott Deyo
>> > > > > The Bridechamber
>> > > > > contact@
>> > > > > http://www.bridechamber.com
>> > > > > Jealous Edison Record Kompany
>> > > > > http://www.jealousedison.com
>> > > > >
>> > > > >
>> > > >
>> > > >
>> > > >
>> > >
>> >
>>
>>

--- In ModularSynthPanels@yahoogroups.com, Michael Beck <mbeck@...> wrote:

>
> Crap - am I the only one who wants knobs?
>
>

Yes :P

I'm fairly new to this DIY thing (only built a few modules that I got
from you) so I'm not looking to build this till later after I gain
more experience on other things, probably end of summer.

It looks like such a cool project and sequencer and it is so well
documented that I have to try making it :) And if you make the panel
it will make things a lot easier for me (and probably a lot of other
people out there too).

Were you planning on putting all the bells and whistles onto the
panel? I hope so :)

--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> To be realistic, that probaby won't be done until mid-summer at the
> earliest.
> But it will probably be around $100 less than FPE.
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On May 15, 2008, at 1:15 PM, lexvortex wrote:
>
> > Scott, I'd love it if you did a Klee panel!! especially with sliders
> > in MOTM format!!! If this were to be a reality, when could we hope to
> > see the Klee panel? And how much? I'm working on a FPD panel, but
> > this is my first one and I don't really want to spend all that money
> > and realize when I got it I made some stupid little errors.
> >
> > --- In ModularSynthPanels@yahoogroups.com, "clickmrmike" <mrmike@>
> > wrote:
> > >
> > > Actually, I'd be all for a slider version of the Klee. I did the
> > > "Milton-esque" version in case I couldn't find sliders that worked
> > > well. I really think it needs to fit into 8 or 10 U max.
> > >
> > > clickmrmike
> > >
> > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > wrote:
> > > >
> > > > I was hoping to do a slider version of the Klee, but we'll see.
> > > > If not, I'll do the, uh... "standard" version ; )
> > > >
> > > > Scott Deyo
> > > > The Bridechamber
> > > > contact@
> > > > http://www.bridechamber.com
> > > > Jealous Edison Record Kompany
> > > > http://www.jealousedison.com
> > > >
> > > >
> > > > On May 14, 2008, at 11:16 PM, sduck409 wrote:
> > > >
> > > > > Hi Scott and others -
> > > > >
> > > > > Any chance of a Klee sequencer panel? Ala Will and Bill or
> > > > > ClickrMike's designs? I've got almost everything together to
> > > build one
> > > > > except for the panel. I've got an .fpd of a hybrid of the 2
> > > > > aforementioned designs almost finalized, but the price - it's
> > hard to
> > > > > knock it under about 140$ even using all sorts of cost cutting
> > > tricks.
> > > > >
> > > > > As there may not be much demand for it, I'm not holding my
> > > breath, but
> > > > > sometimes just mentioning things gets the blood running. So to
> > speak.
> > > > >
> > > > > Steve
> > > > >
> > > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo
<contact@>
> > > > > wrote:
> > > > > >
> > > > > > Welcome Steven,
> > > > > >
> > > > > > Correct, they are all for MOTM. DotCom is on the way, but
> > I've been
> > > > > > saying that for a year now. Really, though, I will get them
> > done.
> > > > > >
> > > > > > You are indeed on the right track w/ the power supply.
> > > > > >
> > > > > > Cheers,
> > > > > > Scott Deyo
> > > > > > The Bridechamber
> > > > > > contact@
> > > > > > http://www.bridechamber.com
> > > > > > Jealous Edison Record Kompany
> > > > > > http://www.jealousedison.com
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> >
> >
> >
>

Well, the sliders would be on a PCB behind the panel, so it wouldn't be
a mounting nightmare.


Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On May 15, 2008, at 4:33 PM, Michael Beck wrote:

> Crap - am I the only one who wants knobs?
>
> > To be realistic, that probaby won't be done until mid-summer at the
> > earliest.
> > But it will probably be around $100 less than FPE.
> >
> > Cheers,
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On May 15, 2008, at 1:15 PM, lexvortex wrote:
> >
> >> Scott, I'd love it if you did a Klee panel!! especially with
> sliders
> >> in MOTM format!!! If this were to be a reality, when could we
> >> hope to
> >> see the Klee panel? And how much? I'm working on a FPD panel, but
> >> this is my first one and I don't really want to spend all that
> money
> >> and realize when I got it I made some stupid little errors.
> >>
> >> --- In ModularSynthPanels@yahoogroups.com, "clickmrmike"
> >> <mrmike@...>
> >> wrote:
> >> >
> >> > Actually, I'd be all for a slider version of the Klee. I did the
> >> > "Milton-esque" version in case I couldn't find sliders that
> worked
> >> > well. I really think it needs to fit into 8 or 10 U max.
> >> >
> >> > clickmrmike
> >> >
> >> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo
> >> <contact@> wrote:
> >> > >
> >> > > I was hoping to do a slider version of the Klee, but we'll see.
> >> > > If not, I'll do the, uh... "standard" version ; )
> >> > >
> >> > > Scott Deyo
> >> > > The Bridechamber
> >> > > contact@
> >> > > http://www.bridechamber.com
> >> > > Jealous Edison Record Kompany
> >> > > http://www.jealousedison.com
> >> > >
> >> > >
> >> > > On May 14, 2008, at 11:16 PM, sduck409 wrote:
> >> > >
> >> > > > Hi Scott and others -
> >> > > >
> >> > > > Any chance of a Klee sequencer panel? Ala Will and Bill or
> >> > > > ClickrMike's designs? I've got almost everything together to
> >> > build one
> >> > > > except for the panel. I've got an .fpd of a hybrid of the 2
> >> > > > aforementioned designs almost finalized, but the price - it's
> >> hard to
> >> > > > knock it under about 140$ even using all sorts of cost
> cutting
> >> > tricks.
> >> > > >
> >> > > > As there may not be much demand for it, I'm not holding my
> >> > breath, but
> >> > > > sometimes just mentioning things gets the blood running. So
> to
> >> speak.
> >> > > >
> >> > > > Steve
> >> > > >
> >> > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo
> >> <contact@>
> >> > > > wrote:
> >> > > > >
> >> > > > > Welcome Steven,
> >> > > > >
> >> > > > > Correct, they are all for MOTM. DotCom is on the way, but
> >> I've been
> >> > > > > saying that for a year now. Really, though, I will get
> >> them done.
> >> > > > >
> >> > > > > You are indeed on the right track w/ the power supply.
> >> > > > >
> >> > > > > Cheers,
> >> > > > > Scott Deyo
> >> > > > > The Bridechamber
> >> > > > > contact@
> >> > > > > http://www.bridechamber.com
> >> > > > > Jealous Edison Record Kompany
> >> > > > > http://www.jealousedison.com
> >> > > > >
> >> > > > >
> >> > > >
> >> > > >
> >> > > >
> >> > >
> >> >
> >>
> >>
>
>
>

All bells and whistles, I'd think. I'm a big fan of those : )

Scott Deyo
The Bridechamber
contact@...
http://www.bridechamber.com
Jealous Edison Record Kompany
http://www.jealousedison.com

On May 15, 2008, at 4:49 PM, lexvortex wrote:

> I'm fairly new to this DIY thing (only built a few modules that I got
> from you) so I'm not looking to build this till later after I gain
> more experience on other things, probably end of summer.
>
> It looks like such a cool project and sequencer and it is so well
> documented that I have to try making it :) And if you make the panel
> it will make things a lot easier for me (and probably a lot of other
> people out there too).
>
> Were you planning on putting all the bells and whistles onto the
> panel? I hope so :)
>
> --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...>
> wrote:
> >
> > To be realistic, that probaby won't be done until mid-summer at the
> > earliest.
> > But it will probably be around $100 less than FPE.
> >
> > Cheers,
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On May 15, 2008, at 1:15 PM, lexvortex wrote:
> >
> > > Scott, I'd love it if you did a Klee panel!! especially with
> sliders
> > > in MOTM format!!! If this were to be a reality, when could we
> hope to
> > > see the Klee panel? And how much? I'm working on a FPD panel, but
> > > this is my first one and I don't really want to spend all that
> money
> > > and realize when I got it I made some stupid little errors.
> > >
> > > --- In ModularSynthPanels@yahoogroups.com, "clickmrmike" <mrmike@>
> > > wrote:
> > > >
> > > > Actually, I'd be all for a slider version of the Klee. I did the
> > > > "Milton-esque" version in case I couldn't find sliders that
> worked
> > > > well. I really think it needs to fit into 8 or 10 U max.
> > > >
> > > > clickmrmike
> > > >
> > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > > wrote:
> > > > >
> > > > > I was hoping to do a slider version of the Klee, but we'll
> see.
> > > > > If not, I'll do the, uh... "standard" version ; )
> > > > >
> > > > > Scott Deyo
> > > > > The Bridechamber
> > > > > contact@
> > > > > http://www.bridechamber.com
> > > > > Jealous Edison Record Kompany
> > > > > http://www.jealousedison.com
> > > > >
> > > > >
> > > > > On May 14, 2008, at 11:16 PM, sduck409 wrote:
> > > > >
> > > > > > Hi Scott and others -
> > > > > >
> > > > > > Any chance of a Klee sequencer panel? Ala Will and Bill or
> > > > > > ClickrMike's designs? I've got almost everything together to
> > > > build one
> > > > > > except for the panel. I've got an .fpd of a hybrid of the 2
> > > > > > aforementioned designs almost finalized, but the price -
> it's
> > > hard to
> > > > > > knock it under about 140$ even using all sorts of cost
> cutting
> > > > tricks.
> > > > > >
> > > > > > As there may not be much demand for it, I'm not holding my
> > > > breath, but
> > > > > > sometimes just mentioning things gets the blood running. So
> to
> > > speak.
> > > > > >
> > > > > > Steve
> > > > > >
> > > > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo
> <contact@>
> > > > > > wrote:
> > > > > > >
> > > > > > > Welcome Steven,
> > > > > > >
> > > > > > > Correct, they are all for MOTM. DotCom is on the way, but
> > > I've been
> > > > > > > saying that for a year now. Really, though, I will get
> them
> > > done.
> > > > > > >
> > > > > > > You are indeed on the right track w/ the power supply.
> > > > > > >
> > > > > > > Cheers,
> > > > > > > Scott Deyo
> > > > > > > The Bridechamber
> > > > > > > contact@
> > > > > > > http://www.bridechamber.com
> > > > > > > Jealous Edison Record Kompany
> > > > > > > http://www.jealousedison.com
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > >
> > >
> > >
> > >
> >
>
>
>

Nope, I'm a Moog/Polyfusion man myself. and even though the the Arp sequencer is great
it's the quantizer not the crappy pots. Any linear pot but the best self sealing 100mm
faders are more trouble than they are worth. They get dirty, wear out, must be replaced. If
you can get one, how much does a crap Arp pot go for ? Then there is the other great
sequencer , the EML 400 another slider nightmare. Then again I only use parametric EQs.

Ok, I'm going to get 1 slider panel but I have 2 Klee and I want a knobby one.

gino

>
> Crap - am I the only one who wants knobs?
>
>
> > To be realistic, that probaby won't be done until mid-summer at the
> > earliest.
> > But it will probably be around $100 less than FPE.
> >
> > Cheers,
> > Scott Deyo
> > The Bridechamber
> > contact@...
> > http://www.bridechamber.com
> > Jealous Edison Record Kompany
> > http://www.jealousedison.com
> >
> >
> > On May 15, 2008, at 1:15 PM, lexvortex wrote:
> >
> >> Scott, I'd love it if you did a Klee panel!! especially with sliders
> >> in MOTM format!!! If this were to be a reality, when could we
> >> hope to
> >> see the Klee panel? And how much? I'm working on a FPD panel, but
> >> this is my first one and I don't really want to spend all that money
> >> and realize when I got it I made some stupid little errors.
> >>
> >> --- In ModularSynthPanels@yahoogroups.com, "clickmrmike"
> >> <mrmike@>
> >> wrote:
> >> >
> >> > Actually, I'd be all for a slider version of the Klee. I did the
> >> > "Milton-esque" version in case I couldn't find sliders that worked
> >> > well. I really think it needs to fit into 8 or 10 U max.
> >> >
> >> > clickmrmike
> >> >
> >> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo
> >> <contact@> wrote:
> >> > >
> >> > > I was hoping to do a slider version of the Klee, but we'll see.
> >> > > If not, I'll do the, uh... "standard" version ; )
> >> > >
> >> > > Scott Deyo
> >> > > The Bridechamber
> >> > > contact@
> >> > > http://www.bridechamber.com
> >> > > Jealous Edison Record Kompany
> >> > > http://www.jealousedison.com
> >> > >
> >> > >
> >> > > On May 14, 2008, at 11:16 PM, sduck409 wrote:
> >> > >
> >> > > > Hi Scott and others -
> >> > > >
> >> > > > Any chance of a Klee sequencer panel? Ala Will and Bill or
> >> > > > ClickrMike's designs? I've got almost everything together to
> >> > build one
> >> > > > except for the panel. I've got an .fpd of a hybrid of the 2
> >> > > > aforementioned designs almost finalized, but the price - it's
> >> hard to
> >> > > > knock it under about 140$ even using all sorts of cost cutting
> >> > tricks.
> >> > > >
> >> > > > As there may not be much demand for it, I'm not holding my
> >> > breath, but
> >> > > > sometimes just mentioning things gets the blood running. So to
> >> speak.
> >> > > >
> >> > > > Steve
> >> > > >
> >> > > > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo
> >> <contact@>
> >> > > > wrote:
> >> > > > >
> >> > > > > Welcome Steven,
> >> > > > >
> >> > > > > Correct, they are all for MOTM. DotCom is on the way, but
> >> I've been
> >> > > > > saying that for a year now. Really, though, I will get
> >> them done.
> >> > > > >
> >> > > > > You are indeed on the right track w/ the power supply.
> >> > > > >
> >> > > > > Cheers,
> >> > > > > Scott Deyo
> >> > > > > The Bridechamber
> >> > > > > contact@
> >> > > > > http://www.bridechamber.com
> >> > > > > Jealous Edison Record Kompany
> >> > > > > http://www.jealousedison.com
> >> > > > >
> >> > > > >
> >> > > >
> >> > > >
> >> > > >
> >> > >
> >> >
> >>
> >>
>