Modular Synth Panels

hey kwote, i want to throw out a suggestion to you, since i know youre just
getting started.

first, go buy yourself something like this (calipers)--they are cheap.

http://img329.imageshack.us/img329/2270/caliperpr8852050wh9.jpg

now, get your pcb and order your parts first! receive them.
now you've got your switches, jacks, pots, etc.
you can use those calipers to determine exactly the size hole you need.
then...design your panel and send to fpe. it will save you some serious
heartache.

gl





--- kwote uno <kwoter@...> wrote:

> Forgive me if I missed any files or messages in the archives, but does
> anyone have a fair amount of FPD files for CGS designs in frac format
> available? I plan on building a fair amount of the CGS catalog in frac
> format and was hoping I could get a head start on things.
>
> I tweaked the Blacet Mult FPD in the files section into a CGS Dual Chime and
> sent it off to FPE last night. Can't say I have much of a handle on the
> software being new to it all but just enough that I'm atleast getting drill
> hole size and allignment right.
>
> Thanks.
>
> -Kwote
>

____________________________________________________________________________________
No Cost - Get a month of Blockbuster Total Access now. Sweet deal for Yahoo! users and friends.
http://tc.deals.yahoo.com/tc/blockbuster/text1.com

On 3/28/08, loopcycle <loopcycle@...> wrote:

hey kwote, i want to throw out a suggestion to you, since i know youre just
getting started.

first, go buy yourself something like this (calipers)--they are cheap.

http://img329.imageshack.us/img329/2270/caliperpr8852050wh9.jpg

now, get your pcb and order your parts first! receive them.
now you've got your switches, jacks, pots, etc.
you can use those calipers to determine exactly the size hole you need.
then...design your panel and send to fpe. it will save you some serious
heartache.

gl

--- kwote uno <kwoter@...> wrote:

> Forgive me if I missed any files or messages in the archives, but does
> anyone have a fair amount of FPD files for CGS designs in frac format
> available? I plan on building a fair amount of the CGS catalog in frac
> format and was hoping I could get a head start on things.
>
> I tweaked the Blacet Mult FPD in the files section into a CGS Dual Chime and
> sent it off to FPE last night. Can't say I have much of a handle on the
> software being new to it all but just enough that I'm atleast getting drill
> hole size and allignment right.
>
> Thanks.
>
> -Kwote
>

__________________________________________________________
No Cost - Get a month of Blockbuster Total Access now. Sweet deal for Yahoo! users and friends.
http://tc.deals.yahoo.com/tc/blockbuster/text1.com

i've got frac panels for the "euro" steiner filter and the tube VCA
on my site: http://www.fluxmonkey.com/fluxGear.htm i've got a few
more floating around here someplace... anythin in particular yr
looking for?

bbob

--- In ModularSynthPanels@yahoogroups.com, "kwote uno" <kwoter@...>
wrote:

>
> Forgive me if I missed any files or messages in the archives, but

does

> anyone have a fair amount of FPD files for CGS designs in frac

format

> available? I plan on building a fair amount of the CGS catalog in

frac

> format and was hoping I could get a head start on things.
>
> I tweaked the Blacet Mult FPD in the files section into a CGS Dual

Chime and

> sent it off to FPE last night. Can't say I have much of a handle

on the

> software being new to it all but just enough that I'm atleast

getting drill

> hole size and allignment right.
>
> Thanks.
>
> -Kwote
>

On Fri, Mar 28, 2008 at 5:57 PM, data2action <rdrake@...> wrote:

i've got frac panels for the "euro" steiner filter and the tube VCA
on my site: http://www.fluxmonkey.com/fluxGear.htm i've got a few
more floating around here someplace... anythin in particular yr
looking for?

bbob

--- In ModularSynthPanels@yahoogroups.com, "kwote uno" <kwoter@...>
wrote:

>
> Forgive me if I missed any files or messages in the archives, but
does
> anyone have a fair amount of FPD files for CGS designs in frac
format
> available? I plan on building a fair amount of the CGS catalog in
frac
> format and was hoping I could get a head start on things.
>
> I tweaked the Blacet Mult FPD in the files section into a CGS Dual
Chime and
> sent it off to FPE last night. Can't say I have much of a handle
on the
> software being new to it all but just enough that I'm atleast
getting drill
> hole size and allignment right.
>
> Thanks.
>
> -Kwote
>

On Sun, Mar 30, 2008 at 6:59 AM, Sam Ecoff <secoff@...> wrote:

On Mar 28, 2008, at 8:31 PM, kwote uno wrote:

thanks for those. i've seen you're site before. nice stuff on there.

 

i'm going for drums first. my next project after the dual chime will be the dual drum and eventually the cynare, but really any CGS in frac will do as they all appeal to me. i haven't seen the 8008 on Ken's site so i'm wondering if there's a diy out there for that one.

The 8008 is not a CGS design. It's Michael Ford's design based on the TR-808 kick circuit.

:-)

Sam E.

_______________________________

Sam Ecoff

Tanner/Monagle

1120 N. Market St.

Milwaukee, WI 53202

(414) 727-8190

www.samecoff.com

haha. yeah. i'm definately not on that level by far, but that's definately something for the archives. i'd like to think someday i could get that diy. thanks!

On 3/31/08, Sam Ecoff <secoff@...> wrote:

On Mar 30, 2008, at 4:07 PM, kwote uno wrote:

i see. nice to know. just wondering if there's a diy of it though?

 

The 808 kick circuit is published in numerous places online. You might start here: 

 

http://machines.hyperreal.org/manufacturers/Roland/TR-808/schematics/

 

You'd have to separate out the kick circuit and make your own PCB. Don't know if you want to get that DIY. ;-)

 

Sam E.

----- Original Message -----

From: kwote uno

To: ModularSynthPanels@yahoogroups.com

Sent: Monday, March 31, 2008 5:18 PM

Subject: Re: [ModularSynthPanels] Re: CGS Frac panels?

haha. yeah. i'm definately not on that level by far, but that's definately something for the archives. i'd like to think someday i could get that diy. thanks!

On 3/31/08, Sam Ecoff <secoff@execpc. com> wrote:

On Mar 30, 2008, at 4:07 PM, kwote uno wrote:

i see. nice to know. just wondering if there's a diy of it though?

 

The 808 kick circuit is published in numerous places online. You might start here: 

 

http://machines. hyperreal. org/manufacturer s/Roland/ TR-808/schematic s/

 

You'd have to separate out the kick circuit and make your own PCB. Don't know if you want to get that DIY. ;-)

 

Sam E.

That is a great site. Thanks!!

On 3/31/08, krisp <krisp14u@...> wrote:

 

You could have a go at this one there's A PCB layout

http://xlargex.xl.funpic.de/projects/808/docs/808bdV1.0.pdf

http://xlargex.xl.funpic.de/projects/808/schema/808_BD300dpi.jpg

 

microlarge is a fantastic site for anyone wanting the odd 808 clone voice

http://xlargex.xl.funpic.de/

 

Cheers

 

Paul D

 

 

Recent Activity

•  5
  New Members
•  1
  New Files

Visit Your Group

Yahoo! News

Odd News

You won't believe

it, but it's true

New business?

Get new customers.

List your web site

in Yahoo! Search.

Yahoo! Groups

Find balance

between nutrition,

activity & well-being.

.