Modular Synth Panels

I see I need to delve further into www.dragonflyalley.com !
: )

I'll check 'em out. It's great to have feedback!

Scott Deyo
The Bridechamber
contact@...
www.bridechamber.com


On Oct 28, 2007, at 5:26 PM, clickmrmike wrote:

> Scott-
>
>  I put my designs for a few of these on the 'ills site, particularly
>  the Subosc and the CV cluster, and switch matrix. I tried to do
>  designs that would fit in reasonable panel space, usually 2U (MOTM
>  format). Those might be worth looking at too.
>
>  clickmrmike
>
>  --- In ModularSynthPanels@yahoogroups.com, "Scott Deyo" <contact@...>
>  wrote:
>  >
>  > Hello Group!
>  >
>  > I made a new folder of silkscreen designs for your perusal and
>  comments. They are in
>  > Illustrator, so your Acrobat Reader should open them. If not, let me
>  know.
>  > For the most part, holes are not shown, but you can imagine where
>  they'd be in most
>  > cases.
>  >
>  > Comments:
>  > Analog Computer: 32 jacks of logic fun. The clock for the divider is
>  shared w/ the ASR.
>  >
>  > Bandpass Filterbank: 6 bandpass filters. Each output's switched jack
>  goes to a mixer,
>  > whose output is connected to output 6. Each input is normalled to
>  the next, so for
>  > "normal" filterbank use, you'd plug your input into jack one and
>  take your output from jack
>  > six.
>  >
>  > VCO: Note there is now a Staircase Input, for use w/ SubOsc or
>  whatever. It has not been
>  > tested and may need input conditioning.
>  >
>  > CV Cluster: Pimp, no?
>  >
>  > Gated Comparator: The Bit Disable is below where switches are, at
>  the bottom of those
>  > vertical lines. Adds the offset switch, as per Ken's suggestion, and
>  some attenuators.
>  >
>  > Infinite/ Diatonic: A hybrid of MOTM and Tellun Small Pot spacing...
>  >
>  > Master Divider: with clock through at the bottom. LED holes not 
> shown.
>  >
>  > Modulo Magic: Yup.
>  >
>  > Saw PS: Includes the suggested output mixer, which can be used by
>  itself. Up and Down PS
>  > are normalled to Inputs 3 and 4.
>  >
>  > SubOsc: This is not an easy build; I call it "spaghetti behind the
>  scenes." A and B can be
>  > used separately, as well as muliplications/ additions via Mix Out,
>  if A and B are taken out
>  > via the switches.
>  >
>  > ASM/ WRS: I don't know if I really understand this module, but
>  here's a panel for it : )
>  >
>  > Cheers,
>  > Scott
>  >
>
>  
>