on 2/4/04 11:43 PM, ModularSynthPanels@yahoogroups.com at ModularSynthPanels@yahoogroups.com wrote: > The specification sheet shows that the diameter of the shaft is .25 > inches. It also states that the threading is M7 x .75mm... whatever > that means! M7 is the diameter in mm to obtain inches multiply by .03937 7* .03937 = .27559 so a .282 hole should work quite nicely since you need a little clearance. Dana --Visit Dana's Synth Site http://members.cox.net/synths
Message
Re: [ModularSynthPanels] Digest Number 131
2004-02-05 by Dana Fiorucci