Modular Synth Panels

Thank you. I was not aware that the Analog Solutions holes differ from the standard. Why would they do that? Anyway, I think I'll go with the Doepfer specs. If I ever decided to buy any AS modules I reckon they could still be fitted by manually filing the holes a little wider...


--- In ModularSynthPanels@yahoogroups.com, "chrisspotta" <chris@...> wrote:
>
> Hi
> 
> I believe that the slotted rack mounting holes are just to allow the module to fit in either Doepfer or AS racks as they are not exactly the same.
> 
> http://www.gearslutz.com/board/electronic-music-instruments-electronic-music-production/450034-analogue-systems-rack-rs10-15-non-modules.html
> 
> --- In ModularSynthPanels@yahoogroups.com, "roglok" <roglok@> wrote:
> >
> > Hi,
> > 
> > I need your advice on designing Eurorack front panels. 
> > 
> > Some manufacturers use slotted panel mounting holes (Cwejman, Metasonix), whereas others use round ones (Doepfer, Analog Solutions, Harvestman) as per the Doepfer specifications http://www.doepfer.de/a100_man/a100m_e.htm.
> > 
> > What are your experiences? Are you occasionally having troubles fitting modules with precise holes?
> > 
> > I am planning some very narrow modules (4HP) and slotted holes would further reduce the limited amount of space available for labels. Also, I'm using 2.5mm screws...
> >
>