As I recall, a 7U version was generally accepted for the Living VCO-plus-waveshaper s large-knob implementation, and a 5U version sans-waveshapers and with small-knobs.
Will and I put some designs on our Living VCO page here (I don't know how to upload these - sorry):
http://www.dragonfl yalley.com/ constructionJHLi vingVCO.htm
At the top of the page is my favorite 7U version... but it has a funky grid-offset and is not as well liked by others. The 7U version most-liked is the Greg-James/Will Hall version below that.
Between these designs is the 5U version.
I believe the discussion left off where a bunch of people were interested in the GJ/WH 7U version, and a bunch of people wanted the 5U version but nothing was decided further.
Dave Brown did a very cool 3U version, by the way:
http://www.modulars ynthesis. com/jhaible/ lvcos/jhlvcos. htm
Bill
--- In ModularSynthPanels@ yahoogroups. com, Eric Frampton <eric@...> wrote:
>
> Was a consensus ever reached about what this panel should look like?
>
> Is there an ETA?
>
> Thanks,
> Eric
>
Message
Re: [ModularSynthPanels] Re: Living VCO panels for MOTM?
2010-05-14 by Scott Deyo
I'm looking to put the 5U on the next run, initiating beginning of June, July shipping hopefully.
How many are interested in the 5U? 7U? Feel free to contact me off-list too. I just want to make sure I make enough, and not way too many!
Scott Deyo
The Bridechamber
Jealous Edison Record Kompany
On May 12, 2010, at 1:51 PM, wjhall11 wrote: